755883
35
Zoom out
Zoom in
Previous page
1/118
Next page
35
AZWG10000
8.4.1 Voice messages
Using the AZ6451 voice module, 4 individual voice texts (at 10 seconds each) can
be recorded and sent (via GSM) to defined contacts in the event of an alarm.
8.4.2 SMS text
The device can send predefined messages to contacts.
IMPORTANT:
The text messages (SMS) for triggering the inputs can be defined individually. The
text messages (SMS) specified below show the default texts only!
Event Description Text message (SMS)
Trigger
Input 1-4 A message is transmitted if an
input is triggered. Input 1: “Intruder Alarm”
Input 2: “Panic Alarm”
Input 3: “Fire Alarm”
Input 4: “Emergency Alarm”
Reset
Input 1-4
A message is transmitted if an
input trigger is reset. Input 1: “Intruder Restore”
Input 2: “Panic Restore”
Input 3: “Fire Restore”
Input 4: “Emergency Restore”
Tamper A message is transmitted if the
cover or wall contact is triggered. “GSM box tamper”
Reset
Tamper A message is transmitted if the
tamper state is is reset. “GSM box tamper OK”
Fault
PSTN A message is transmitted if the
analogue telephone line fails.
The message is transmitted
following timeout of the period
set for “PSTN Loss Delay”.
“Line fault”
Reset
PSTN A message is sent when the
analogue telephone line is
working again.
“ Phone Line OK”
Reset
GSM A message is sent when the
GSM network is stable again. “GSM line OK”
Fault
Mains supply
voltage
A message is sent if the mains
power supply fails. The message
is transmitted following timeout of
the period set for “AC Loss
Delay”.
“Mains loss”
Reset
Mains supply
voltage
A message is sent when the
mains power supply is resumed. “Mains power OK”
Battery fault A message is sent if the battery
is missing or of the voltage falls
below 11 V DC.
“GSM low battery
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus azwg10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus azwg10001 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info