755883

Abus azwg10001 Manual

37
Zoom out
Zoom in
Previous page
1/118
Next page
37
AZWG10000
GSM transmission:
PBX: If the first digit of a dialling code is the digit entered here (usually
“0”), this is deleted.
CONSTANT: If the dialling code entered remains after the first digit is deleted
(see PBX), it remains when switching from PSTN to GSM.
REMOVE: If the dialling code entered remains after the first digit is deleted
(see PBX), it is deleted when switching from PSTN to GSM.
ADD: If an additional dialling code has to be added, it is defined under
ADD. If the CONSTANT code is effective, this additional dialling
code is not added.
Example:
The telephone number of the emergency service to which protocols are transmitted
is 021/123456. A voice message is also sent to the mobile phone number
0160/654321.
The telephone line of the alarm centre is linked to the telephone line of the GSM-
Interface that is connected to a PBX (extension line). To get an outside line, a “0”
has to be dialled. Since the GSM-Interface is also in Birmingham, no local area
code has to be dialled for the PSTN.
PSTN standard transmission:
If the GSM-Interface recognises an existing PSTN telephone line, the dialler
forwards incoming calls of connected equipment (e.g. an alarm system).
>>>The telephone number in the alarm centre is specified as 0123456, since a 0 is
needed to get an outside line and no local area code is needed. The mobile phone
number is entered as 00160654321.
GSM transmission (PSTN failure):
>>> Under NS, a 0 must be programmed since it is no longer necessary to get an
outside line as with PSTN.
>>> The digit 01 is defined under CONSTANT.
>>> The local area code 021 must be defined under ADD.
>>> Due to the settings for ADD and CONSTANT, the device no longer sends
0123456 over GSM to the emergency centre, but the following number instead:
021/123456. The voice message is sent to the mobile phone number 0160/654321.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus azwg10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus azwg10001 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info