755883

Abus azwg10001 Manual

34
Zoom out
Zoom in
Previous page
1/118
Next page
34
AZWG10000
8.3 Outputs
The GSM-Interface has a total of 4 outputs, of which one is a relay output and three
are transistor outputs. All outputs can be switched either by triggering the inputs or
by SMS commands. Each output switches either as a pulse or constantly.
8.3.1 Output events
Outputs that are defined as “event” can be activated by the following events:
Inputs 1-4: Triggering or resetting an input results in switching the output.
Tamper: The output switches when the cover or wall contact is triggered.
PSTN Lost: Loss of analogue telephone line. The output switches following
timeout of the period defined as “PSTN Loss Delay” during programming.
GSM Trouble: The output switches in the following circumstances:
SIM card missing or defective
GSM signal strength too low
GSM network fault
The output switches following timeout of the period defined as “GSM Loss
Delay” during programming.
Mains power loss: Loss of power supply. The output switches following
timeout of the period defined as “AC Loss Delay” during programming.
Low Battery: Switches when the voltage supply falls below 11 V DC.
SIM card expired: The output switches 30 days before expiry of the period
defined as “SIM validity” during programming.
Periodic test: The output switches following timeout of the “clock time”
defined during programming.
PSTN+GSM Loss: The output switches if both the analogue line and the
GSM network fail.
8.3.2 Clip control function
Output 1 can be defined as “Clip control” type.
This output can be switched by all pre-programmed telephone numbers that have
this function. The user dials the number of the device and hangs up after the
second ringing tone. The GSM-Interface recognises the telephone number and
automatically switches output 1.
The advantage of this function is that the call is free! The Clip control function can,
for example, be useful for switching on external lighting.
8.4 Message transmission
The GSM-Interface can transmit messages to up to 8 contacts, using two different
communication formats:
Voice messages
Text messages (SMS)
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus azwg10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus azwg10001 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info