677182

Abilia 419891 Gewa Andromeda IR-REC8 Manual

18
Zoom out
Zoom in
Previous page
1/32
Next page
18
10.2 Simple programming of a relay with double IR channels
The Andromeda IR-REC8 BED can be programmed so that a relay can be activated
by two different GewaLink channels. This can be used, for example, to have a button
“down” which lowers the foot and head simultaneously. In this case, program the two
relays with a second GewaLink channel that controls this function.
1. Press the selected button on the IR transmitter for the channel that is to be
programmed as the first channel, and at the same time, press the programming
button for the selected relay on the receiver.
2. Wait until the indicator lamp flashes three times.
3. Keep pressing the programming button for the selected relay. Press the button
on the IR transmitter for the channel that is to be programmed as the second
channel.
4. Wait until the indicator lamp flashes three times.
5. Release the programming button of the receiver and the button on the IR
transmitter.
6. Check the function by pressing the selected buttons on the IR transmitter.
11. Advanced programming
The Andromeda IR-REC8 BED is designed to be easy to program, and has a simple
and an advanced programming mode. Follow the instructions below for advanced
programming.
11.1 Programming channels
Do as follows to re-program:
1. Press programming button P.
2. Press programming button 1.
3. Press the programming button for the
desired relay. The indicator lamp for the
selected relay is lit.
4. Press the button on the IR transmitter for
the channel that is to be programmed until
the indicator lamp flashes three times.
5. Repeat step 1-4 to program the other relays
in the same way.
6. Check the functions by pressing the
selected buttons on the IR transmitter.
If you are not satisfied with the selected channel (button on the IR transmitter) or
function, simply repeat the procedure.
Note! The Andromeda IR-REC8 BED can only be used with monostable function.
Programming buttons
1 2 3 4 5 6 7 8
Programming button P
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 419891 Gewa Andromeda IR-REC8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 419891 Gewa Andromeda IR-REC8 in the language / languages: English, Swedish, Norwegian as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info