Manual AAS Lounge Lizard EP-4 (page 26 of 55) (English)

541312

Zoom out

Zoom in

1/55

26 Parameters

the tine has the same effect on the spectrum of the sound as moving it above by the same amount.

The Symmetry parameter is also adjustable from the Play view.

The Distance knob sets the horizontal distance between the pickup and the tine bar. Turning

this knob clockwise, increases this distance and moves the pickup away from the tine. Note that

the sound becomes more distorted (overdriven) as the pickup is moved closer to the tine.

The Lounge Lizard EP uses two different types of pickups in order to expand the tonal possibil-

ities of the instrument. The Type switch is used to select the type of pickup types used by Lounge

Lizard EP. In the R position, Lounge Lizard EP uses a model of electro-dynamic pickups such as

found in Rhodes

pianos. In the W position, the model used is that of an electro-static pickups

such as found in Wurlitzer

pianos.

The Input knob is used to adjust the amount of signal from the fork going into the pickup

which will affect the amount of distortion applied to the signal by the pickup. As the knob is

turned clockwise, the amount of input signal increases. The Output knob controls the amount of

signal from the pickup and sent to the effect section. As the knob is turned clockwise, this amount

increases. Note that the Output signal can be modulated with the pitch of the note played by using

the Key knob. Turning this knob to the left will increase the output amplitude of low notes relative

to high notes while turning the knob to the right will have the opposite effect and increase the

relative amplitude of high notes. In its center position, the output amplitude is uniform across the

entire keyboard.

One can obtain different sounds with different settings of the Input and Output parameters. For

example, a small amount of input with higher amount of output will produce a cleaner sound then

a large amount of input with small output value.

5.2.4 The Damper Module

The Damper module simulates the production of noise when dampers are raised from or applied

on the fork when a key is depressed or released. This gives a more realistic and lively sound.

The Amount knob is used to set the amplitude (volume) of the damper noise present in the ﬁnal

sound. Turning the knob clockwise increases the presence of the damper noise in the ﬁnal sound.

The Tone knob is used to adjust the stiffness of the dampers. When in its

leftmost position, the dampers are soft producing a more mellow sound. Turn-

ing the knob clockwise increases the stiffness of the dampers and the center

frequency of the noise produced by the damper.

Finally, the Att Rel knob is used to control the amount of noise introduced

by the dampers at the beginning or end of a note when the dampers are either

lifted from the fork or applied on the fork. When turned to the left, in the Att position, noise will

be introduced in the sound during the attack phase of notes while in the Rel position, noise will be

added during the release phase of notes. In its center position, an equal amount of noise will be

added both during the attack and release phases of notes.

i dont have a serial number or challenge code how do i get mine to authorize Submitted on 18-1-2023 at 12:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Lounge Lizard EP-4 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Lounge Lizard EP-4 Manual

Product: