541312
25
Zoom out
Zoom in
Previous page
1/55
Next page
5.2 The Edit View 25
tone bar. The Decay knob controls the time necessary for the oscillations of the tone bar to fade out
when a key is depressed and a note is held. Turning this knob clockwise increases the decay time.
Note that the Tone and Tine parameters can also be set on the Play view.
The Release Time
The Release knob in the Fork module applies both to the tone and tine bars and is used to control
the decay time of the fork oscillations when a key is released and dampers are applied on the fork.
Turning this knob clockwise increases this release time. Note that this parameter is different from
the Decay parameter on the tone and tine bar settings which determine the decay time of the tone
and tine oscillations when there is no damper applied to the fork. The characteristics of the noise
produced by the dampers when they are applied on the fork are adjusted in the Damper module as
will be described in section 5.2.4.
5.2.3 The Pickup Module
The Pickup module simulates the way a magnetic coil captures the sound of the fork in an electric
piano.
The position of the pickup relative to the tine bar is a very important parameter in determining
the tone of the instrument. Indeed, the shape of the signal measured by the pickup strongly depends
on how it is positioned with respect to the tine bar. This geometric parameter is fully adjustable on
the Lounge Lizard EP, as illustrated in Figure 10 for a wide range of tonal colors.
Figure 10: Position of the pickup relative to the tine bar.
The Symmetry knob is used to adjust the vertical
position of the pickup relative to the tine bar. In its
leftmost position, the pickup is right in front of the
tine producing more harmonics in the sound. Turn-
ing the knob clockwise, moves the pickup above the
tine resulting in a more mellow tone. Note that this
control only allows one to move the pickup above the tine, this is because moving the pickup below
25


Need help? Post your question in this forum.

Forumrules
1

Forum

aas-lounge-lizard-ep-4

Reset search

  • i dont have a serial number or challenge code how do i get mine to authorize Submitted on 18-1-2023 at 12:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AAS Lounge Lizard EP-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AAS Lounge Lizard EP-4 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info