Manual AAS Lounge Lizard EP-4 (page 24 of 55) (English)

541312

Zoom out

Zoom in

1/55

24 Parameters

The Key knob is used to modulate the amount of noise depending on the pitch of the notes

played on the keyboard. In its center position, the amount of noise is the same for all notes and

equal to the value set by the Noise knob. When turned to the left, there is more noise for low notes

than high notes. Turning the knob to the right has the opposite effect and the noise component is

higher for high notes than low notes. Note that the Noise parameter can be adjusted directly from

the Play view.

5.2.2 The Fork Module

The Fork module is at the heart of the sound generation mechanisms of the Lounge Lizard EP. The

fork is the component that produces sound after being excited by the hammer. It has roughly the

shape of a tuning fork with a small branch called the Tine and a larger one the Tone bar.

The Tine Bar

The tine is where the hammer hits the fork.

It produces a high metallic sound very important

for clear electric piano sounds.

The amplitude of the tine signal present in the

ﬁnal sound from the fork is controlled with the

help of the Tine knob. Turning the knob clockwise increases the presence of the tine in the ﬁnal

sound. The amplitude of the tine signal can be modulated with the pitch of the note played using

the Key knob. Turning this knob to the left will increase the presence of the tine in low notes while

decreasing it for high notes. Turning this knob to the right has the opposite effect and increases the

presence of the tine in high notes while decreasing it in low notes. In its center position the volume

of the tine is uniform across the whole range of the keyboard.

The timbre of the tine bar can be adjusted with the Color knob which controls the relative

amplitude of low and high partials in the spectrum of the sound produced by the tine bar. Turning

this knob to the left will favor lower harmonics while turning it to the right will increase the relative

amplitude of the high harmonics present in the spectrum.

The Decay knob is used to adjust the time taken by the tine to fade out when a key is depressed

on the keyboard and a note is held. Turning this knob clockwise increases the natural decay time

of the oscillations.

The Tone Bar

The tone bar is the biggest part of the fork, it is connected to the tine and starts to oscillate when

the hammer hits the tine. The Tone knob is used to control the amplitude of the signal from the

tone bar present in the ﬁnal sound. Turning this knob clockwise results in a louder sound from the

i dont have a serial number or challenge code how do i get mine to authorize Submitted on 18-1-2023 at 12:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Lounge Lizard EP-4 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Lounge Lizard EP-4 Manual

Product: