Manual AAS Lounge Lizard EP-4 (page 22 of 55) (English)

541312

Zoom out

Zoom in

1/55

22 Parameters

knob. Turning the modulation knob to the right has the opposite effect and increases the value of

the parameter for high notes while decreasing it for low notes.

The Vel modulation knobs are used to modulate the value of a parameter depending on the

velocity signal received from the keyboard so that the value of a parameter will increase as notes

are played harder on the keyboard. The position of the knob is used to adjust the amount of

modulation applied to the parameter. In its leftmost position, the modulation source is turned off

and the value of the parameter will not vary with the velocity signal from the keyboard. Turning

the knob clockwise will increase the effect of the modulation signal on the value of the parameter.

5.1.5 Synchronisation

The rate of the Tremolo module and certain effects can be synchronized to the clock of the host

sequencer. To do so, simply turn on the Sync switch. Sync values are adjusted with the Rate knob

and range from 16 quarter notes (4 whole notes) to 1/8 of a quarter note (a thirty-second note)

where the duration of the whole note is determined by the host sequencer clock. The effect can

also be synced to a triplet (t) or dotted note (d).

5.2 The Edit View

The Edit view is activated by clicking on the Edit button in the top part of the interface. It allows

one to go ’under the hood’ and adjust the different piano parameters and therefore to customize

its tone and behavior. On vintage instruments voicing was done with a screwdriver and a lot of

patience. You can now do this with just a few clicks.

5.2.1 The Hammer Module

The Hammer module is used to simulate the force impact produced by the piano hammer when

striking the fork of the piano. It has three main parameters, Stiffness, Noise and Force.

Stiffness

The Stiffness knob determines if the

hammer is soft or hard which is related

to its material. As this knob is turned

clockwise, the hammer gets harder. Fig-

ure 9 shows the effect of the adjust-

ment of the stiffness on the output sig-

nal from this module. As the stiffness is increased the excitation signal becomes narrower which

reduces the interaction time between the hammer and the fork. This can be understood by the fact

that the harder is the hammer, the more rapidly it will bounce following the impact with the fork

i dont have a serial number or challenge code how do i get mine to authorize Submitted on 18-1-2023 at 12:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Lounge Lizard EP-4 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Lounge Lizard EP-4 Manual

Product: