Manual AAS Lounge Lizard EP-4 (page 27 of 55) (English)

541312

Zoom out

Zoom in

1/55

5.3 The FX View 27

Note that the Damper module responds to the sustain pedal signal via the Damper MIDI Con-

trol Change message (CC#64). In order for Lounge Lizard EP to respond to a sustain pedal,

simply set your synth or MIDI controller to send its sustain pedal signal via this MIDI Control

Change message.

5.2.5 The Tremolo Module

The Tremolo module, introduces low frequency

amplitude modulation, or tremolo, in the sound. This

is an effect extensively used with electric pianos. The

effect is switched on or off using the On button.

The Type selector enables one to select the shape

of the wave that creates the tremolo. The triangle

wave gives a more regular (smoother) tremolo while the soft square wave gives a more chopped

effect similar to the tremolo on Rhodes

suitcase pianos.

The Mono button is used to determine if the tremolo is mono or stereo. When the button is

depressed, the tremolo is on and in mono mode otherwise it is in stereo mode. In stereo mode, the

sound bounces with a 180 degrees phase from left to right while in mono mode it is the same on

the left and right channels.

The Depth is used to set the amount of modulation in the amplitude of the signal in other words

the amount of tremolo effect. In its leftmost position, the amplitude is not modulated and turning

the knob clockwise gradually increases the amplitude of the modulation.

The Rate knob controls the frequency of the modulation. Turning the knob clockwise increases

this frequency and results in a faster modulation rate. Note that this knob is active only when the

Sync button is in its off position.

Both the Depth and Rate parameters can be adjusted from the Play view. The Tremolo module

can also be switched on or off from the same view. Finally note that the Depth parameter can

also be controlled by the modulation wheel appearing on the Play view or that from your MIDI

keyboard as explained in Section 5.4

5.3 The FX View

The FX view is displayed by clicking on the FX button in the utility section at the top of the

interface and is based around a Multi-effects module.

The Multi-Effects module allows one to process and shape the signal from the piano before

sending it to the output. This module comprises an EQ and a Compressor in series with two

conﬁgurable effect processors and a Reverb. The conﬁguration of the EQ and the Compressor

module depends on the position of the SC and Pre butons of these modules as will be explained

below. The two effect processors can be set to a different type by using the drop-down menu

i dont have a serial number or challenge code how do i get mine to authorize Submitted on 18-1-2023 at 12:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AAS Lounge Lizard EP-4 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AAS Lounge Lizard EP-4 Manual

Product: