534678

3Dprintingsystems UP Plus Manual

30
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
quantity should be set to 700 grams.
with is ABS or PLA.
TIP:
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
weigh it, and subtract
280 grams from the weight. This gives you the value to enter into the mat
rial text box.
Status: Displays
the temperature of
Stop All: Stops
heating and all the movement of the printer. Once
model being printed is
cancelled
stopped.
After you use the “Stop All” option, you will need to re
Pause Print:
This button allows you to pause a print in mid
print job where it left off. This is very useful if you, for example, want to change the material co
our mid-
print. Another popular use for pausing a job mid
into printed cavities and then printed
truder and platform heating during the pause, it’s not recommended to pause for long periods of
time.
Nozzle & Platform: The f
ive buttons
and the platform. The nozzle moves to the left and right; the platform moves forward and bac
ward.
The “To” button controls
the height of the platform
procedure described in 3.3.2.
The “Bottom” button returns
the platform to the lowest position.
Set Nozzle Height:
Takes whatever value you have in the “To” box and transfers it to the Nozzle
box of the setup screen.
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
quantity should be set to 700 grams.
You can also specify whether the material you are printing
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
280 grams from the weight. This gives you the value to enter into the mat
the temperature of
the nozzle and platform.
heating and all the movement of the printer. Once
you
click this button, the
cancelled
.
You CANNOT resume a print job once the printer has been
After you use the “Stop All” option, you will need to re
-initialise
the printer.
This button allows you to pause a print in mid
-progress, yo
u can
print job where it left off. This is very useful if you, for example, want to change the material co
print. Another popular use for pausing a job mid
-
print is to allow fasteners to be inserted
into printed cavities and then printed
over to lock the fastener into place. Note:
This keeps the e
truder and platform heating during the pause, it’s not recommended to pause for long periods of
ive buttons
(FL, FR, Center, NL, NR) control the
position of the
and the platform. The nozzle moves to the left and right; the platform moves forward and bac
the height of the platform
, and is
used in the nozzle height calibration
the platform to the lowest position.
Takes whatever value you have in the “To” box and transfers it to the Nozzle
Troubleshooting
You can also specify whether the material you are printing
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
280 grams from the weight. This gives you the value to enter into the mat
e-
click this button, the
current
You CANNOT resume a print job once the printer has been
the printer.
u can
then resume the
print job where it left off. This is very useful if you, for example, want to change the material co
l-
print is to allow fasteners to be inserted
This keeps the e
x-
truder and platform heating during the pause, it’s not recommended to pause for long periods of
position of the
nozzle
and the platform. The nozzle moves to the left and right; the platform moves forward and bac
k-
used in the nozzle height calibration
Takes whatever value you have in the “To” box and transfers it to the Nozzle
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info