534678

3Dprintingsystems UP Plus Manual

29
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
Place: Click the
“Auto Place”
model on the platform
. When there
recommended.
By Hand: Press the Ctrl
key
button
. Move the mouse and drag the model to the
Using the “Move” button
: Click
the text box, and then
choose the axis
NOTE:
When more than one model is
least 12mm to prevent
the models sticking together
them closer and then merge the models together. Click
bines multiple separate models into one mod
3.3.4
Other Maintenance Options
Click “Maintain” on the “3D Print” menu, and the following dialog box pops up:
(Windows version)
Extrude: Squeezes material
When the temperature is high enough
the system beeps
, feed the filament into the hole
grab it) then it will s
tart extruding
(See section 6)
, this function is used to deliver
also be used to
test whether the nozzle
Withdraw: Withdraws
the material
nozzle needs to be changed, click this button. When the nozzle is
beeps, gently
pull out the material. If the material gets stuck, pull
New Spool:
This is used so the printer can keep track of how much material has been used
warn you if you don’t have enough material left to print your model. Click this button and enter
the value of how many grams of material you have on the current spool. If i
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
“Auto Place”
button, on the far right of the toolbar, to
automatically place
. When there
is more than one model on the platform,
using
key
and choose the target model by
pressing and holding
. Move the mouse and drag the model to the
desired position.
: Click
the “Move” button
on the toolbar, choose or input the distance
choose the axis
for the direction in which you want to move
When more than one model is
loaded, the gap between each model
should be ke
the models sticking together
.
If printing multiple models, you can move
them closer and then merge the models together. Click
“Edit” menu, click
“Merge” which co
bines multiple separate models into one mod
el, this can be saved as an UP3 file.
Other Maintenance Options
Click “Maintain” on the “3D Print” menu, and the following dialog box pops up:
(Windows version)
(Mac version)
out of the nozzle
. Click on this button, and the nozzle is heated.
When the temperature is high enough
(260°C), the material is squeezed out
of the nozzle
, feed the filament into the hole
(it might need a small push for the filament to
tart extruding
, it will beep again when finished
. When changing the material
, this function is used to deliver
the new material to the nozzle
. This function can
test whether the nozzle
is working correctly.
the material
from the extrusion head.
When the material runs out
nozzle needs to be changed, click this button. When the nozzle is
up to temperature (2
pull out the material. If the material gets stuck, pull
it
out it by hand.
This is used so the printer can keep track of how much material has been used
warn you if you don’t have enough material left to print your model. Click this button and enter
the value of how many grams of material you have on the current spool. If i
t is a new spool, the
Troubleshooting
automatically place
the
using
“Auto Place” is
pressing and holding
the left mouse
on the toolbar, choose or input the distance
in
for the direction in which you want to move
.
should be ke
pt to at
If printing multiple models, you can move
“Merge” which co
m-
Click “Maintain” on the “3D Print” menu, and the following dialog box pops up:
. Click on this button, and the nozzle is heated.
of the nozzle
. When
(it might need a small push for the filament to
. When changing the material
. This function can
When the material runs out
, or the
up to temperature (2
60°C) and
out it by hand.
This is used so the printer can keep track of how much material has been used
, and
warn you if you don’t have enough material left to print your model. Click this button and enter
t is a new spool, the
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info