534678

3Dprintingsystems UP Plus Manual

28
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
Scaling the model:
Click “Scale”
scale the model uniformly by clicking the scale button again, or
want to scale if you only want to scale in one direction.
Example1: Scale up
the model
Procedures: 1. Click “Scale”; 2. Input
Example2: Scale up the mod
el
Procedures: 1. Click “Scale”; 2. Input 1.2 in the
Unit Conversion:
This option is provided as a convenient way to convert metric models to imp
rial, and vice versa. To convert an
menu and click “Scale” again
click “Scale”.
3.2.5 Placing models onto
the build platform
Appropriately placing your models on
TIP:
In general, try to place your model in the centre of the platform.
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
Click “Scale”
, choose or input a scaling factor
in the text box
scale the model uniformly by clicking the scale button again, or
choose the axis
around which you
want to scale if you only want to scale in one direction.
the model
uniformly by 2.0 times.
Procedures: 1. Click “Scale”; 2. Input
2.0 in the text box; 3. Click “Scale” again.
el
by 1.2 times along the Z axis only.
Procedures: 1. Click “Scale”; 2. Input 1.2 in the
text box; 3. Click “Z axis”
This option is provided as a convenient way to convert metric models to imp
rial, and vice versa. To convert an
imperial model to metric, select the 25.4 option from the scale
menu and click “Scale” again
.
To convert from metric to imperial, select the 0.03937 option and
the build platform
Appropriately placing your models on
the platform can have an effect on print quality.
In general, try to place your model in the centre of the platform.
Troubleshooting
in the text box
, and then either
around which you
This option is provided as a convenient way to convert metric models to imp
e-
imperial model to metric, select the 25.4 option from the scale
To convert from metric to imperial, select the 0.03937 option and
the platform can have an effect on print quality.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info