688688

ZyXEL VMG8623-T50A Manual

370
Zoom out
Zoom in
Previous page
1/421
Next page
Chapter 43 Troubleshooting
VMG/XMG Series User’s Guide
370
5 If the problem continues, contact the vendor.
43.2 Zyxel Device Access and Login
I forgot the IP address for the Zyxel Device.
1 The default LAN IP address is 192.168.1.1.
2 If you changed the IP address and have forgotten it, you might get the IP address of the Zyxel Device by
looking up the IP address of the default gateway for your computer. To do this in most Windows
computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway
might be the IP address of the Zyxel Device (it depends on the network), so enter this IP address in your
Internet browser.
3 If this does not work, you have to reset the device to its factory defaults. See Section 1.4.5 on page 53.
I forgot the password.
1 See the cover page for the default login names and associated passwords.
2 If those do not work, you have to reset the device to its factory defaults. See Section 1.4.5 on page 53.
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address (Section 8.2 on page 177), use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I
forgot the IP address for the Zyxel Device.
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See Section
Figure 19 on page 30.
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
enabled.
4 If it is possible to log in from another interface, check the service control settings for HTTP and HTTPS
(Maintenance > Remote MGMT).
5 Reset the device to its factory defaults, and try to access the Zyxel Device with the default IP address.
See Section 1.4.5 on page 53.
… 370 …


Need help? Post your question in this forum.

Forumrules
1

Forum

zyxel-vmg8623-t50a

Reset search

  • Bhag bhabTouch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour. be deleted aTouch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.fter 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.ghg GB ggygbgg Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.b Submitted on 29-9-2022 at 03:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL VMG8623-T50A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL VMG8623-T50A in the language / languages: English as an attachment in your email.

The manual is 14,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info