730080
155
Zoom out
Zoom in
Previous page
1/202
Next page
Chapter 24 Troubleshooting
LTE3302-M432 & LTE3312-M432 User’s Guide
155
1 The default IP address of the LTE Device is 192.168.1.1.
2 If you changed the IP address and have forgotten it, connect a computer to the Ethernet port on the
LTE Device and look up the IP address of the default gateway for your computer. To do this in most
Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway should be the IP address of the LTE Device (it depends on the network), so enter this IP address
in your Internet browser.
3 Reset your LTE Device to change all settings back to their default.
I forgot the password.
1 If you forget your password or IP address, or you cannot access the Web Configurator, you can use the
RESET button at the back of the LTE Device to reload the factory-default configuration file. This means
that you will lose all configurations that you had previously saved, the password will be reset to “1234”
and the IP address will be reset to “192.168.1.1”.
2 Make sure the POWER LED is on.
3 Press the RESET button for five seconds to set the LTE Device back to its factory-default configurations.
4 Press the RESET button for two seconds to restart the LTE Device.
I cannot see or access the Login screen in the Web Configurator.
1 Make sure your Internet browser does not block pop-up windows and has JavaScript and Java
enabled. See your browser help.
2 Make sure you log into the Web Configurator from the LAN and that your computer is in the same
subnet as the LTE Device when remote management service is disabled. If remote management is
enabled, make sure you log in from the WAN with a specific IP address.
3 Reset the device to its factory defaults, and try to access the LTE Device with the default IP address. See
the Troubleshooting chapter for more information.
4 If the problem continues, contact the network administrator or vendor.
I can see the Login screen, but I cannot log in to the LTE Device.
1 Make sure you have entered the user name and password correctly. The default user name is admin
and the default password is 1234. This field is case-sensitive, so make sure [Caps Lock] is not on.
2 This can happen when you fail to log out properly from your last session. Try logging in again after 5
minutes.
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL LTE3312-M432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL LTE3312-M432 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL LTE3312-M432

ZyXEL LTE3312-M432 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info