679708

ZyXEL IES-1000 Manual

64
Zoom out
Zoom in
Previous page
1/313
Next page
IES-1000 User’s Guide
Hardware Troubleshooting 8-3
Table 8-4 ADSL LED Troubleshooting
STEP CORRECTIVE ACTION
10 Repeat the steps above using a different ADSL port.
8.5 The LAN LED(s) Do Not Turn On
Table 8-5 LAN LED Troubleshooting
STEP CORRECTIVE ACTION
1 Make sure the LAN port of your network module is connected to an Ethernet WAN switch with a
straight-through Category 5 UTP (Unshielded Twisted Pair) cable with RJ-45 connectors.
2 The factory default settings for the LAN (Ethernet) port of the network module are:
Speed: Auto
Duplex: Auto
Flow control: Auto
If the IES-1000’s auto-negotiation is turned off, an Ethernet port uses the pre-configured speed and
duplex mode when making a connection, thus requiring you to make sure that the settings of the WAN
switch Ethernet port are in the same order to connect.
8.6 There Is No Voice on an ADSL Connection
The AAM1008 has internal POTS (Plain Old Telephone Service) splitters and CO side RJ-11 ports that allow the
telephone wiring used for ADSL connections to also simultaneously carry normal voice conversations.
Table 8-6 ADSL Voice Troubleshooting
STEP CORRECTIVE ACTION
1 Make sure the subscriber has a POTS splitter properly installed.
2 Check the ADSL line pin assignments shown in the Pin Assignments appendix.
3 Check the telephone wire connections between the subscriber and the MDF(s).
4 Check the telephone wire and connections between the MDF(s) and USER port(s).
5 Check the telephone wire and connections between the MDF(s) and the CO port(s). Check the
connection from the MDF(s) to the telephone company or the PBX.
6 Check the telephone wire mapping on the MDF(s).
7 Make sure the in-house wiring works and is connected properly.
8 Repeat the steps above using a different ADSL port.
8.7 Testing Wiring
Use the following tests if there is no voice.
Systematically test wiring using a functioning telephone to determine if there is a wiring problem. If the
connection is good, the telephone will return a dial tone. Letters in the figure shown next indicate the systematic
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL IES-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL IES-1000 in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info