679708
62
Zoom out
Zoom in
Previous page
1/313
Next page
IES-1000 User’s Guide
Hardware Troubleshooting 8-1
This chapter explains how to troubleshoot IES-1000 hardware.
8.1 System Startup
When you turn on the IES-1000, it automatically runs a self-test that takes approximately 20 seconds. The SYS
LED will remain on if your IES-1000 has started normally.
8.1.1 The SYS LED Does Not Turn On
Table 8-1 SYS LED Troubleshooting
STEP CORRECTIVE ACTION
1 With the AC power model, make sure the power cord is properly connecting the IES-1000’s power
socket to an appropriate power outlet. Refer to the Hardware Specifications appendix to make sure
you are using the correct power source.
With the DC power model, make sure the power wires are properly connecting the IES-1000’s power
terminal to an appropriate power supply and the power supply is operating normally. Refer to the
Hardware Specifications appendix to make sure you are using the correct power supply.
2 Make sure the network module is properly installed in the IES-1000 (refer to the Hardware Installation
chapter).
3 With the AC power model, make sure the fuse is not burnt-out. Replace the fuse if it is burnt out (refer
to the Removing and Installing a Fuse appendix).
4 The LED itself or the unit may be faulty; contact your vendor.
8.2 The ALM LED Is On
The ALM (alarm) lights when the IES-1000 is overheated and/or the fans are not working properly and/or voltage
readings are outside the tolerance levels.
Table 8-2 ALM LED Troubleshooting
STEP CORRECTIVE ACTION
1 Make sure you can feel and/or hear the fans working - working fans emit a low buzz and blow air.
If the fans are not working properly, make sure the power connector is connected properly.
Contact your vendor if the fans do not work. Do not remove fans from the IES-1000. Only a qualified
distributor should remove or repair fans.
Chapter 8
Hardware
Troubleshooting
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL IES-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL IES-1000 in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info