796886
48
Zoom out
Zoom in
Previous page
1/68
Next page
Gateway 400 User Guide | Frequently Asked Questions
48
6 Frequently Asked Questions
Questions
You can read the frequently asked questions about the Gateway 400 here. The answers are provided
after each set of questions.
Question 1 I have been using a different modem in the past. Can I use the LAN cable to connect the
Gateway 400?(Answer on page 48)
Question 2 Can I connect multiple computers to the Gateway 400?(Answer on page 48)
Question 3 I cannot access the user interface of the Gateway 400.(Answer on page 48)
Question 4 How can I assign a static IP address for my computer?(Answer on page 48)
Answers
Question 1 I have been using a different modem in the past. Can I use the LAN cable to connect the
Gateway 400?
We recommend that you always use the supplied cable. You can, of course, also use your own net-
work cable to connect your computer.
Question 2 Can I connect multiple computers to the Gateway 400?
The Gateway 400 has two network ports that are labeled LAN1 and LAN2.
You can use these ports to connect additional computers or other network devices (such as network
printers, etc.). The network activity of the connected devices is indicated via the LAN1 and LAN2 LED
displays on the Gateway 400 . Please note that separate networks are involved.
Question 3 I cannot access the user interface of the Gateway 400.
Please check if the connection between your computer and the Gateway 400 is OK. One of the LAN
LEDs (LAN1 or LAN2) or the WLAN LED should be lit or blinking rapidly.
Please verify the network settings of your computer. Refer to Chapter 1.4, Computer Settings, on
page 10 for details.
Question 4 How can I assign a static IP address for my computer?
The automatic integration of your computer at the Gateway 400 only occurs if the DHCP server is
enabled. If the DHCP server is disabled, you will need to assign a static IP address to your computer.
To do this, change the he LAN settings of your computer as described below.
Under Windows 2000
Click on Start -> Settings -> Control Panel -> Network and Dial-up Connections.
Double-click on the icon LAN Connection and then click on the Properties button. This opens the
Local Area Connection Properties screen dialog.
Select Internet Protocol (TCP/IP).
Click on the Properties button. This opens the Properties of Internet Protocol (TCP/IPv4) screen
dialog.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info