796886
46
Zoom out
Zoom in
Previous page
1/68
Next page
Gateway 400 User Guide | Configuration
46
5.8.12 Diagnostics
This screen is used for service purposes.
5.8.12.1 System Messages
This screen shows the system messages of the Gateway 400. This information is used for detecting
and diagnosing irregularities in the behavior of the Gateway 400.
5.8.12.2 Packet Tracer
Here you can activate packet tracing for all device interfaces and save the trace information to a file.
Select the appropriate interface from the Target Interface drop-down menu and click Start. Click
Save data to download the file to your computer and analyze it locally.
5.8.12.3 LED Test
This screen allows you to can simulate the various signaling statuses of the indicators and thus
helps you to familiarize yourself with the various LED states described in Chapter 2.1, page 12.
To create a clearly defined starting point, the LEDs should be turned off first. Select the Turn all LEDs
off check box and click Execute.
The LED test allows you to simulate different LED modes using various options.
The On/Off mode with the options Off and On.
The Flash mode with the options 2 Hz (flashing slowly) and 4 Hz (flashing fast).
The Timer mode is currently not supported.
After selecting the desired options from the drop-down menus, click Execute.
5.8.13 QoS
The Quality of Service (QoS) indicates the quality of a communication service. Here you can activate
the QoS settings for your device. QoS must be enabled for configured classes and rules to take effect
in the system. Please refer to “Class Creation” on page 47 and “Rule Creation” on page 47 for further
information and advanced settings.
5.8.13.1 Settings
WAN offers a lower bandwidth than LAN, thus clearly reducing the transmission quality of applica-
tions such as voice, games or VPN in the network. QoS can be used to classify the data traffic of these
applications (by type of traffic) and to reserve certain transfer speeds for them (Diffserv = differen-
tiated services).
To use QoS, select the Enable QoS Settings option.
Note
The LAN LED lights up for the Turn all LEDs off checkbox.
Note
To return to the current LED states, clear the Turn all LEDs off check box and then click
Execute.
Note
QoS classes will only take effect if appropriate QoS rules are created first.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info