796886
47
Zoom out
Zoom in
Previous page
1/68
Next page
Configuration | Gateway 400 User Guide
47
5.8.13.2 Class Creation
If you want to set up QoS for your local network, click New. The overview shows previously config-
ured QoS settings. To edit a QoS setting, click on the respective pencil icon at the end of the over-
view. .
The new screen dialog Edit Classes for Data Traffic allows you to create or edit QoS classes. To do this,
select the DSCP class from one of the following four main categories:
BE
Best Effort Forwarding.
AFxy
Assured Forwarding enables the transmission of four independent classes. Within a class, IP
packets can be assigned one of three different, assured priority levels.
CSx
The “Class selector (CS)” settings are used for IP priorities (IP Precedence) of the older Type of
Service (ToS) QoS to ensure backward compatibility.
EF
Expedited Forwarding is intended to provide low delay, low jitter and low loss in the delivery of
packets.
Once you have selected the desired DSCP class, you can pre-assign a certain percentage of the total
available bandwidth to it. Select the option Allow More to allow this value to be exceeded if needed.
Click Activate to enable the selected DSCP class. Click Save to save your settings and return to the
QoS Overview.
For the configured DSCP classes to take effect, select the option Enable QoS and click Save.
5.8.13.3 Rule Creation
In this screen, you can define classification rules to group outbound data packets into DSCP classes.
Click New to create a new rule. The existing rules are displayed in an overview. To edit a rule, click
on the respective pencil icon at the end of the overview. .
Enter a Rule Name. From the Traffic Type drop-down menu, select the appropriate application.
If the rule is to apply to one or more network devices, click Advanced. In the two new drop-down
menus Local IP Address and Remote Address, specify whether the rule is to apply to one or more net-
work devices. Enter the appropriate details in the input fields that appear (MAC address of the net-
work device, IP address range, IP subnet).
Select the Diffserv forwarding group int he Map to Forwarding Group drop-down list and click Save.
5.8.13.4 Statistics
This screen displays statistics about the traffic of Diffserv forwarding groups in the past 12 hours.
The display is automatically refreshed every 5 minutes.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info