666219
44
Zoom out
Zoom in
Previous page
1/63
Next page
LEVEL OPERATIONS
Pressing the same INPUT/FUNCTION key again cal Is
up the output level display.
OVERVIEW
Level operations allow you to set the input and
output signal levels and monitor the levels on the
LCD.
SELECTING
THE
LEVEL OPERATIONS
Pressing any of the INPUT/FUNCTION keys selects
the Level menu for the corresponding input and
output terminal.
Green
LED
indicates nominal signal; red
LED
indicates peak signal.
Indicates the selected
input terminal
(INPUT
1)
Peak meter
I
I
IN
i'=============ll
,PK=
_54dB,
lATT=
+12dBj
1-
--
I
Peak Attenuation
Use the EDIT DIAL to adjust the degree of attenua-
tion. The signal level is indicated in the
LCD
both
by a graphic bar display and a numeric peak level
value
(PK).
The display has a temporary peak hold
feature which continues to display the peak level
value for approximately one second before the next
peak is displayed. Attenuation range is from
-66
dB to
-12
dB.
You should be careful to set the input level so that
the lowest level signal turns on the green
LED
and
moves the bar in the display, and that the highest
level signal does not cause the red
LED
to light
continuously.
Note:
Input level settings are also determined by the
rear panel input level switches. These should be
set to the proper level before using the Level menu
controls.
To exit from this mode, press either the
MODE
key or
the EXIT key.
QUlCK
OPERATION
AND
EDITING
SHORTCUTS
QUlCK
Key
In addition to its function of deleting and inserting
characters in the Naming mode, the QUlCK key is
also used
in
the Edit mode as an editing aid. Press-
ing the QUlCK key while in the Edit mode lights the
corresponding red
LED
and
confines parameter
selection to the currently selected effect module (or
the Routing parameters). For example, if you are
editing
a
parameter in effect module
1
and do not
wish to edit parameters in any other module, press-
ing the
QUlCK
key will let you select only the param-
eters
of
effect module
1.
Pressing the QUlCK key
again releases the function and lets you select from
all of the Patch program's parameters. This editing
method provides greater efficiency and allows you to
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info