666219
42
Zoom out
Zoom in
Previous page
1/63
Next page
Enter a bank name of up to
8
characters, then press
the EXECUTE key. The method for entering bank
names is the same as that for entering Patch names.
Press the EXECUTE key to format, or press the EXlT
key to cancel.
The message shown below is displayed while the
card is being formatted.
SAVE SAVE whole SYSTEM
BANK 1 [SYSTEM
I]
The message below prompts for confirmation.
/
SAVE
*
*.
SURE?
*
*
BANK
I
[SYSTEM
11
Press the EXECUTE key again to store or pr,ess the
EXlT key to cancel.
Note: Even if you do not enter
a
bank name, you can
still press the EXECUTE key when you select the
bank. The same message shown above is dis-
played and you can store the bank.
The message shown below is displayed when the
save operation is completed and the LCD returns to
the initial SAVE screen after two seconds.
SAVE SAVE whole SYSTEM
I
Saved
The message below is displayed when a card has not
been inserted.
SAVE SAVE whole SYSTEM
I
NO
Card
The message shown below appears when the save
operation is attempted for a
RAM
card that
is
not
compatible with the
9010.
A new card must be
formatted before it can be used.
SAVE SAVE whole SYSTEM
Formatting.-.
The LCD returns to the initial SAVE screen after the
format operation has been completed, and the Save
operation can be performed.
SAVE SAVE whole SYSTEM
BANK
1
[SYSTEM
11
VERl
Mode
(Verify
Mode)
This mode is used, after the operation in the SAVE
mode above, to confirm that the data in user memory
has been properly stored to card.
VERl VERIFY CARD
&
USER
BANK
1
[SYSTEM 1
1
I
Select the card bank by turning the EDIT DIAL, then
press the EXECUTE key.
I
VERI
*
*
SURE?
*
*
BANK 1 [SYSTEM 1
]
I
Press the EXECUTE key again to verify, or press the
EXlT key to cancel. The message shown below is
displayed when verification has been completed.
The LCD returns to the initial VERl screen after two
seconds.
VERl
VERIFY CARD
&
USER
I
Verified
I
SAVE SAVE whole SYSTEM
I
CARD Mismatch. Format?
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info