666219

Zoom 9010 Manual

45
Zoom out
Zoom in
Previous page
1/63
Next page
operate the 9010 more effectively when editing the
parameters of a single effect module.
Note:
Even though several effects can be active
simultaneously in normal operation, pressing the
QUICK key here temporarily disables all effects other
than the one currently selected.
The EDlT DlAL can also be used within this QUICK
key function to jump quickly between two selected
parameters in a single effect module by Rapid ope-
ration.
1. Press the QUICK key to turn its LED to red.
2.
Select one parameter and change its value.
3.
Turn the EDlT DlAL and select the second
parameter. Change this parameter value as well.
4.
Spin the EDlT DlAL quickly to instantly jump
back to the first parameter.
5.
Spinning the EDlT DlAL quickly jumps back
to the second parameter, whether or not you
changed the value of the first parameter again.
You can jump between the two parameters as often
as you like by using the EDlT DlAL and the QUICK
key in this way. This function is convenient when
repeatedly editing two parameters.
Other
Editing
Shortcuts
Reading this section is not absolutely necessary to
understanding the basic operation of the 9010.
However, once you get accustomed to using the
instrument, reading through this section will help you
use it more effectively.
1)
Parameter values can be changed by turning the
EDlT DlAL with your right hand while pressing the
DlAL
key with your left hand, after selecting the
parameter to be edited. Take your hand from the
DIAL
key when you reach the desired value, then
select the next parameter.
2)
The selection of the effect module and the
selection of the parameters within the module are
performed in sequence in the Edit mode. When
using the EDlT DlAL to select the desired effect
module, but are slowed down by the dial stepping
through items one by one, you can use the EDlT
DIAL'S rapid operation mode
to
skip the display of
parameters within the effect module and jump direct-
ly to the selection of effect modules.
3)
As in suggestion
772
above, when selecting the
effect module, you can jump to the first effect of
each group, or the THRU setting of the reverb/delay
group, modulation group, and other effect groups by
using the EDlT DlAL in the rapid operation mode.
For a list of the effects in each group, refer to the
Effect Module Types and Effect Programs chart on
p.13 in the section, THE 9010 SYSTEM.
4)
Also as in
#2
above, when
you
change parameter
values using the EDlT DlAL in the rapid operation
mode, the display stops at selected intermediate
points.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info