623347
38
Zoom out
Zoom in
Previous page
1/54
Next page
Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
38
Once an input is enabled, and depending on the selected input type, a new tab will be
available from the menu on the left.
3.4.1 SWITCH/SENSOR
After configuring an input as a switch/sensor, it is necessary to select the actions to be
performed on the arrival of a falling edge and on the arrival of a rising edge.
Figure 21. Input: Switch/Sensor
The available options are:
Rising Edge: sets the value to be sent to the bus when a rising edge is
detected in the input line:
Nothing (no action is performed).
0: object "[Ix] Edge" is sent to the KNX bus with value "0".
1: object "[Ix] Edge" is sent to the KNX bus with value "1"”.
Switching: "0" or "1" are alternatively sent to the KNX bus.
Falling Edge: sets the value to be sent to the bus when a falling edge is
detected in the input line: “Nothing”, “0”, “1” oSwitching”.
Sending of "0" Delay: specifies the time, in seconds, after which the value
"0" will be sent, once the corresponding edge has been received.
Sending of "1" Delay: specifies the time, in seconds, after which the value
"1" will be sent, once the corresponding edge has been received.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Roll-ZAS Touch Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Roll-ZAS Touch Controller in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Roll-ZAS Touch Controller

Zennio Roll-ZAS Touch Controller User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info