623347
52
Zoom out
Zoom in
Previous page
1/54
Next page
Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
52
160, 161
1 Bit
O
C T R - -
DPT_Switch
0/1
-
-
[Ix] Probe Error
1=Error;0=No Error
162, 164
2 Bytes
I
C - - W -
DPT_Value_Temp
-273.00 - 670760.00
25.00
-
[Tx] Temperature Source 1
External Sensor Measure
163, 165
2 Bytes
I
C - - W -
DPT_Value_Temp
-273.00 - 670760.00
25.00
-
[Tx] Temperature Source 2
External Sensor Measure
166, 167 1 Byte I
C - - W -
DPT_HVACMode
1=Comfort. 2=Standby
3=Economy
4=Protection
-
-
[Tx] Special Mode 1-byte HVAC Mode
168, 172
1 Bit
I
C - - W -
DPT_Trigger
0/1
-
-
[Tx] Special Mode: comfort
0=Nothing; 1=Trigger
1 Bit
I
C - - W -
DPT_Switch
0/1
-
-
[Tx] Special Mode: comfort
0=Off; 1=On
169, 173
1 Bit
I
C - - W -
DPT_Trigger
0/1
-
-
[Tx] Special Mode: standby
0=Nothing; 1=Trigger
1 Bit
I
C - - W -
DPT_Switch
0/1
-
-
[Tx] Special Mode: standby
0=Off; 1=On
170, 174
1 Bit
I
C - - W -
DPT_Trigger
0/1
-
-
[Tx] Special Mode: economy
0=Nothing; 1=Trigger
1 Bit
I
C - - W -
DPT_Switch
0/1
-
-
[Tx] Special Mode: economy
0=Off; 1=On
171, 175
1 Bit
I
C - - W -
DPT_Trigger
0/1
-
-
[Tx] Special Mode: protection
0=Nothing; 1=Trigger
1 Bit
I
C - - W -
DPT_Switch
0/1
-
-
[Tx] Special Mode: protection
0=Off; 1=On
176, 177
1 Bit
I
C - - W -
DPT_Window_Door
0/1
-
-
[Tx] Window Status (input)
0=Closed; 1=Open
178, 179
1 Bit
I
C - - W -
DPT_Trigger
0/1
-
-
[Tx] Comfort Prolongation
0=Nothing; 1=Timed Comfort
180, 181 1 Byte O
C T R - -
DPT_HVACMode
1=Comfort. 2=Standby
3=Economy
4=Protection
- W
- W
[Tx] Special Mode Status 1-byte HVAC Mode
182, 183
2 Bytes
I
C - - W -
DPT_Value_Temp
-273.00 - 670760.00
-
-
[Tx] Setpoint
Thermostat setpoint input
2 Bytes
I
C - - W -
DPT_Value_Temp
-273.00 - 670760.00
-
-
[Tx] Basic Setpoint
Reference setpoint
184, 185
1 Bit
I
C - - W -
DPT_Step
0/1
-
-
[Tx] Setpoint Step
0=-0.5ºC; 1=+0.5ºC
186, 187
2 Bytes
I
C - - W -
DPT_Value_Tempd
-670760.00 - 670760.00
-
-
[Tx] Setpoint Offset
Float offset value
188, 189
2 Bytes
O
C T R - -
DPT_Value_Temp
-273.00 - 670760.00
- W
- W
[Tx] Setpoint Status
Current setpoint
190, 191
2 Bytes
O
C T R - -
DPT_Value_Temp
-273.00 - 670760.00
- W
- W
[Tx] Basic Setpoint Status
Current basic setpoint
192, 193
2 Bytes
O
C T R - -
DPT_Value_Tempd
-670760.00 - 670760.00
- W
- W
[Tx] Setpoint Offset Status
Current setpoint offset
194, 195
1 Bit
I
C - - W -
DPT_Reset
0/1
-
-
[Tx] Setpoint Reset
Reset setpoint to default
1 Bit
I
C - - W -
DPT_Reset
0/1
-
-
[Tx] Offset Reset
Reset offset
196, 197
1 Bit
I
C - - W -
DPT_Heat_Cool
0/1
-
-
[Tx] Mode
0 = Cool; 1 = Heat
198, 199
1 Bit
O
C T R - -
DPT_Heat_Cool
0/1
- W
-
[Tx] Mode Status
0 = Cool; 1 = Heat
200, 201
1 Bit
I
C - - W -
DPT_Switch
0/1
-
-
[Tx] On/Off
0=Off; 1=On
202, 203
1 Bit
O
C T R - -
DPT_Switch
0/1
- W
- W
[Tx] On/Off Status
0=Off; 1=On
204, 206
1 Bit
O
C T R - -
DPT_Switch
0/1
- W
- W
[Tx] Control Variable (Cool)
2-Point Control
1 Bit
O
C T R - -
DPT_Switch
0/1
- W
- W
[Tx] Control Variable (Cool)
PI Control (PWM)
205, 207
1 Bit
O
C T R - -
DPT_Switch
0/1
- W
- W
[Tx] Control Variable (Heat)
2-Point Control
1 Bit
O
C T R - -
DPT_Switch
0/1
- W
- W
[Tx] Control Variable (Heat)
PI Control (PWM)
208, 210
1 Byte
O
C T R - -
DPT_Scaling
0% - 100%
- W
- W
[Tx] Control Variable (Cool)
PI Control (Continuous)
209, 211
1 Byte
O
C T R - -
DPT_Scaling
0% - 100%
- W
- W
[Tx] Control Variable (Heat)
PI Control (Continuous)
212, 214
1 Bit
O
C T R - -
DPT_Switch
0/1
- W
- W
[Tx] Additional Cool
Temp >= (Setpoint+Band) => "1"
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Roll-ZAS Touch Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Roll-ZAS Touch Controller in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Roll-ZAS Touch Controller

Zennio Roll-ZAS Touch Controller User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info