623347
39
Zoom out
Zoom in
Previous page
1/54
Next page
Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
39
Periodical Sending of "0": defines the period, in seconds, for a cyclical
sending of the value "0" after the detection of the corresponding edge. Setting
this to 0 disables the periodical sending.
Periodical Sending of "1": defines the period, in seconds, for a cyclical
sending of the value "1" after the detection of the corresponding edge. Setting
this to 0 disables the periodical sending.
Lock: if "Yes" is chosen, a new 1-bit communication object, "[Ix] Lock", will
become visible, making it possible to lock and unlock the corresponding input
(with one "1" or one "0", respectively). During the time the input is locked, any
edges detected in the signal will be ignored.
Sending of Status on Bus Voltage Recovery: this option allows forcing an
automatic sending to the KNX bus of the state of the input line after a voltage
recovery, with a certain delay (value between 0 and 255, in seconds).
3.4.2 TEMPERATURE PROBE
Configuring an input as a temperature probe brings the following options.
Figure 22. Input: Temperature Probe
Temperature Sensor Calibration: setting a certain calibration (in tenths of a
degree) permits correcting the value received from the external temperature
sensor in case it is found to be altered for any reason and therefore different
to other available references, making it possible to synchronise both
references.
Temperature Sending Period: this is intended to set the period (in tens of a
second) for a cyclical sending to the KNX bus of the current temperature
value. Setting this to 0 indicates that no periodical sending will take place.
Send with a Temperature Change: apart from performing a periodical
sending, ZAS can send the bus the value of the current temperature
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Roll-ZAS Touch Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Roll-ZAS Touch Controller in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Roll-ZAS Touch Controller

Zennio Roll-ZAS Touch Controller User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info