623347

Zennio Roll-ZAS Touch Controller Manual

27
Zoom out
Zoom in
Previous page
1/54
Next page
Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
27
level, with no need of performing multiple long presses for regulations greater
than the parameterised step.
Shutter: this option permits sending orders to a shutter actuator by means of
two 1-bit objects, “[Px][Byz] Move shutter” (“0”=move up, and “1”=move
down) and “[Px][Byz] Stop shutter”, and a 1-byte object, “[Px][Byz] Shutter
position”, which sets the desired position for the shutter, in percentage, at any
time (0%=Top, 100%=Bottom). The updated state of the shutter, received
from the shutter actuator once ZAS has sent the order corresponding to the
button presses, will be shown on the screen, as a percentage, between the
two buttons.
The shutter control is carried out as follows:
Decrease Button: a long press sends the actuator an order to move the
shutter down (through the “[Px][Byz] Move shutter” object), while a short
press sends an order to stop the shutter (value “1” through the "[Px][Byz]
Stop shutter” object). Or, if already stopped, to move it slightly downwards
in case slats or step motion are available.
Increase Button: a long press sends the actuator an order to move the
shutter up (through the “[Px][Byz] Move shutter” object), while a short
press sends an order to stop the shutter (value “0” through the "[Px][Byz]
Stop shutter” object). Or, if already stopped, to move it slightly upwards in
case slats or step motion are available.
Scaling: allows sending a percentage value through the "[Px][Byz] Scaling"
object associated to the particular pair of buttons. Lower and upper limits
must be configured (values between 0% and 100%). The behaviour of this
type of buttons is as follows:
Decrease Button: a short press decreases the percentage value by 1 unit,
while a long press decreases the value by 10 units.
Increase Button: a short press increases the percentage value by 1 unit,
while a long press increases the value by 10 units.
Counter: allows sending an integer value through the "[Px][Byz] 1-byte
counter" object associated to the particular pair of buttons. Lower and upper
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Roll-ZAS Touch Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Roll-ZAS Touch Controller in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Roll-ZAS Touch Controller

Zennio Roll-ZAS Touch Controller User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info