623347

Zennio Roll-ZAS Touch Controller Manual

25
Zoom out
Zoom in
Previous page
1/54
Next page
Roll-ZAS
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
25
First of all, the Header parameter is shown, from where it is possible to establish an
identifying text string (up to 10 characters) for that particular page, which will be shown
in the upper left corner of the display (Figure 6).
Next, it is possible to establish the desired configuration, individual or in pairs, for
each of the 8 buttons available in every page. The different options for every
configuration are explained next.
3.3.1.1 PAIR BUTTONS
The options for pair buttons are the following:
Note: for all the cases listed below it is possible to select, through the Icon parameter,
the pair of icons to be drawn, on the screen, over the two buttons. For a list of the
available icons, please refer to
Annex I.
Switch: enables a 1-bit communication object, "[Px][Byz] Binary control",
which will send value "0" or "1", depending on the button being pressed each
time. This option allows setting a name for the functionality associated to the
buttons, and a text message for the Switch On and Switch Off actions.
The LED Lighting parameter sets if the pair of buttons will have a Regular
lighting (while a button is being pressed, the corresponding LED will stay on
for a few instants), a State-dependent lighting (depending on the current
value of object "[Px][Byz] Binary control", the left or the right LED will remain
on indefinitely) or a State-dependent (both LEDs) lighting (both LEDs will stay
on or off simultaneously, depending on the value of the object.
Dimmer: 3 communication objects are enabled. First, "[Px][Byz] Light
On/Off", a 1-bit object to send switch on/off orders to a light dimmer. Second,
"[Px][Byz] Light dimming", a 4-bit object for sending step dimming orders. And
third, "[Px][Byz] Light indicator", a 1-byte object that indicates, in percentage,
the current luminosity state (0%=Off, 100%=On, or any intermediate value
received from the dimmer once ZAS sends the dimming orders due to button
presses). The display will show, between the two buttons, the current value of
this status object.
Light regulation occurs as follows:
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Roll-ZAS Touch Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Roll-ZAS Touch Controller in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Roll-ZAS Touch Controller

Zennio Roll-ZAS Touch Controller User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info