539677
50
Zoom out
Zoom in
Previous page
1/54
Next page
56 VC3050-001_v02
2
Remove the foam lter (15). If the foam lter (15) is dirty,
it may be washed with running water. Remember to dry it off
before reinstalling the lter.
The main function of the foam lter (15) is protecting the
basic HEPA lter (14) from excessive dirt.
Duetosafetyreasonsitisforbiddentoinstalla
wetordamagedfoamlter(15).
Clean the pleads of the basic HEPA lter
(14), if any of
them are damaged, the lter denitely must be replaced.
If the basic HEPA lter (14) is dirty, it may be washed with
running water. Remember to dry it off before reinstalling
the lter.
Duetosafetyreasonsitisforbiddentoinstalla
wetordamagedbasicHEPAlter(14).
Place the foam lter back into its place.
3
Put the new/rinsed HEPA basic lter (14) back in its place
pay attention to put the two protrusions in the bottom part
of the HEPA basic lter (14) in the holes of the dust container.
A characteristic click noties about a proper installation.
4
Place the CYKLON dust container with the installed
basic HEPA lter (14) in the chamber of the vacuum cleaner.
A characteristic click noties about a proper installation.
OUTLET FILTER
1
In order to replace the outlet lter (12) pick up the
vacuum cleaner handle, then press the fastenings on the
cover of the outlet lter and slide out the cover out of the
vacuum cleaner.
2
Remove the outlet lter frame out of the vacuum
cleaner.
3
Remove the outlet lter out of the frame fastenings.
If the outlet lter (12) is dirty, it may be rinsed with running
water. Remember to dry the lter, before its reinstallation.
Duetosafetyreasons,itisvitalnevertoinstall
adampoutletlter.
4
Carefully put the new/rinsed lter onto all frame
fastenings.
Place the cover in such a way that the two protrusions
situated in the bottom part of the cover nd their way into
the holes in the body of the vacuum cleaner, and then
press the lter cover to snap the fastenings on the body.
A characteristic click noties about a proper installation.
Alwaysreplaceadamagedinletlteronlywith
abrandnewone.
E
Disassembly/assembly of the “CYKLON”
dust container
The vacuum cleaner is equipped with a removable CYKLON
dust container (a removable segment of the vacuum cleaner)
gathering all pollutants. When the CYKLON dust container is
full, it needs to be emptied.
1
The vacuum cleaner is equipped with a CYKLON dust
container full indicator (6). When the CYKLON dust container
full indicator (6) lights during operation (with the nozzle or
the brush lifted above the cleaned surface) it means that
the container is full and needs to be emptied. In addition the
CYKLON dust container full indicator (6) may activate if the
suction hose or the elements attached to the suction hose
are clogged.
2
Switch off the vacuum cleaner by pressing the “on/off”
button (7).
3
Unplug the appliance.
4
Press the side button on the end of the hose, and then
remove the end of the hose from the inlet hole of the vacuum
cleaner.
5
Press the fastening of the CYKLON dust container
(8) and remove the CYKLON dust container (16) from the
vacuum cleaner.
6
Place the CYKLON dust container over a waste bin.
Press the button on the CYKLON dust container and its
contents will fall out into the bin.
7
After emptying the container, snap its bottom shut.
The container must be tightly closed.
Otherwise the dust might enter the vacuum
cleanerchamberandthesuctionpowerwillbe
reduced.
8
Place the emptied CYKLON dust container into the
vacuum cleaner. A characteristic click noties about a proper
installation.
Emptying the CYKLON dust container is necessary, when:
a) the CYKLON dust container full indicator light is on,
b) the vacuum cleaner operates poorly,
c) the CYKLON dust container is full.
Special accessories
The following special accessories may be purchased in retail
outlets:
Parquet brush “BNB” (22)
Is used to clean and polish hard, scratch sensitive surfaces
such as wooden oors, oor panels, parquet, marble, tiles,
etc.
Delicate and soft natural bristles ensure maximum vacuum
effectiveness and protects against scratching the cleaned
surface.
F
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Pluser VC3050.0 SK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Pluser VC3050.0 SK in the language / languages: English, Polish as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info