539677

Zelmer Pluser VC3050.0 SK Manual

49
Zoom out
Zoom in
Previous page
1/54
Next page
55VC3050-001_v02
Appliance elements
A
1
Outlet lter cover
2
Combination brush fastening
3
Plug and cord
4
Cord rewind button
5
Suction power regulation control
6
CYKLON dust container full indicator
7
ON/OFF button
8
CYKLON dust container fastening
9
Handle
10
Suction hose
11
Telescopic suction tube with a fastening hook
12
Outlet lter (installed in the vacuum cleaner)
13
Outlet lter frame (installed in the vacuum cleaner)
14
Basic HEPA lter (installed in the vacuum cleaner)
15
Foam lter (installed in the vacuum cleaner)
16
“CYKLON” dust container (part of the removable segment
of the vacuum cleaner)
17
Inlet lter cone (installed in the vacuum cleaner)
18
Switchable combination brush
19
Crevice nozzle
20
Small brush
21
Small nozzle
22
Parquet brush “BNB” (additional equipment – may be
bought in retail centers)
Preparing the vacuum cleaner
for operation
1
Press the side button on the end of the suction hose.
2
Place the end of the suction hose in the vacuum cleaner.
You should hear a distinctive click, if you do it right.
3
Attach the other end of the hose (the handle) to the
suction tube.
4
Adjust the length of the telescopic suction tube by sliding
the slider according to the arrow and pull out/ pull the tube
together.
5
Assemble the proper nozzle or brush to the other end of
the suction tube.
6
To clean hard surfaces – wooden oors, plastic oors,
ceramic tiles etc. pull out the brush by pressing the switch on
the combination brush according to the gure .
7
Pull the plug and cord (3) out of the vacuum cleaner.
Whilepullingoutthecord,payattentiontothe
yellowstripewhichsignalstheendofthecord.
Furtherattempts(pullingoncord)mayresultin
damagingthecord.
8
Plug in the appliance.
B
Before turning the vacuum cleaner on, check whether the
CYKLON dust container is installed in the chamber of the
vacuum cleaner, and whether the inlet and outlet lters are
installed in the vacuum cleaner.
9
Switch on the vacuum cleaner by pressing the “on/off”
button (7).
10
The vacuum cleaner is equipped with a suction power
regulation control. The power is controlled by means of
a knob.
11
Turning the knob according to the label increases or
respectively decreases the suction power.
Filter disassembly
Before changing the lters make sure that the vacuum cleaner
is switched off and unplugged from the mains supply.
INLET FILTER CONE
It is necessary to clean the inlet lter cone from time to time.
1
Remove the CYKLON dust container and empty it
according to paragraph (F).
2
Release the fastening of the HEPA basic lter (14) and
remove it from the CYKLON dust container.
3
Press the button situated on the CYKLON dust container
and open the bottom of the container.
4
Turn the inlet lter cone (17) clockwise.
5
Remove the inlet lter cone from the CYKLON dust
container.
6
If the inlet lter cone (17) is dirty, it may be rinsed
with running water. Remember to dry the cone before its
reinstallation.
Pay attention to the gasket placed on the
bottomoftheconecollar.Donotloseit.
7
Place a new/rinsed inlet lter cone into the socket in
such a way that the two protrusions placed on the collar are
situated under the fastening in the body of the container.
8
The cone should be pressed tightly and turned to the
limit counterclockwise. A characteristic click noties about a
proper installation.
9
Snap the bottom of the CYKLON dust container.
10
Place the HEPA basic lter (14). Pay attention so that the
two protrusions on the bottom part of the HEPA basic lter
(14) nd their way into the holes of the dust container.
11
Place the CYKLON dust container in the chamber of the
vacuum cleaner. A characteristic click noties about a proper
installation.
BASIC HEPA FILTER & FOAM FILTER
It is necessary to clean the basic HEPA lter from time to
time, as it is contaminated with dust.
Uninstall the CYKLON dust container and empty it according
to paragraph (F).
1
Release the fastening of the HEPA basic lter (14) and
remove it from the CYKLON dust container.
C
D
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Pluser VC3050.0 SK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Pluser VC3050.0 SK in the language / languages: English, Polish as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info