Manual Zelmer MM1000 (page 79 of 82) (English, Polish)

538960

Zoom out

Zoom in

1/82



MM1000-002_v01

Juicer (Fig. G)

The juicer is an accessory for some types of mincers.

It allows squeezing juice from fruits such as: raspberries,

currants, strawberries, gooseberry and additionally from

grapes and tomatoes. Berry fruits such as currants can

be squeezed with stalks. Fruits with large stones, such as

plums, cherries etc. can be squeezed in the appliance after

removing the stones.

Parts of the juicer:

Chamber

Worm

Body

Nut

Juice channel

Adjusting screw

Bowl (from the mincer unit)

Pusher (from the mincer unit)

Screen – 2 pieces

No. 1 – smaller openings

No. 2 – larger openings

Large sealing ring for the body (3)

Small sealing ring for the worm (2)

Hook



PREPARING THE JUICER FOR OPERATION AND

ITS OPERATION (Fig. H)

Make sure that the sealing rings (10) and (11) are tted

onto the body (3) and the worm (2). If not, insert them into

the sealing grooves in these elements (the body and the

worm).

Insert the screen (9) into the body (3) and press rmly

home.

Insert the worm (2) into the chamber (1).

 

     





Insert the body with the screen onto the worm making

sure that the sieve faces downwards , and the positioning

slot ts into the protrusion in the chamber.

Screw on the nut (4) to attach the body to the

chamber (1).

Screw the adjusting screw (6) into the body (3).

Slide the juice channel (5) over the adjusting screw until

it snaps on the body (3) – “click”.

Attach the assembled juicer to the drive unit in the same

way as the mincer body.

Insert the bowl (7) and the pusher (8) – from the mincer

unit – onto the feeding tube.

Place the appropriate dishes for the juice and pomace

under the outlet of the juice channel (5) and the adjusting

screw (6).

Plug in the appliance.

Turn the appliance on by means of the switch button,

and then feed the fruit, pushing with the pusher.

 

      





      

   



Observe the pomace dryness during squeezing. If it

●

is too dry, unscrew the adjusting screw (6), to avoid

clogging the appliance with the pomace.

 



       





        

    



        





Unplug the appliance if the chamber outlet becomes

●

clogged. Pay special attention on the juice squeezing

process, make sure the screen openings are not clogged.

Disconnect the juicer from the drive unit (as in the case

of the mincer body), dismantle the juicer, clean (wash)

the juicer elements. Use the included brush to clean the

appliance, especially the screen.

Burr grinder (Fig. I)

Nut

Burr regulator

Body with knob

Internal burr

External burr

Worm

Grinder chamber

Pan

The groove of the body must t into the protrusion of the

grinder chamber

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer MM1000 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer MM1000 Manual

Product: