538960

Zelmer MM1000 Manual

78
Zoom out
Zoom in
Previous page
1/82
Next page
 MM1000-002_v01
Parts and accessories comprising:
9
Screen with 8 mm holes
10
Screen with 2.7 mm holes
11
Sausage stufng tube
12
Insert
13
Switch
14
Lock button
Mechanical safety device for the motor (Fig. A)
15
Scroll
16
Coupling
17
Screw M5x20
The mincer is equipped with mechanical protection, which
secures the motor against damage – the teeth of the scroll
coupling will break when the mincer is overloaded (e.g., when
bones have entered inside the mincer body).
Replace the broken coupling with the new one:
unscrew the screw
●
(17) in the scroll (3) with the broken
coupling,
remove the broken coupling
●
(16),
t the new coupling
●
(16) and tighten it with the screw (17).
Working with the mincer unit (Fig. C)
Insert the following parts into the mincer body (2):
1
Insert the scroll (3) with the coupling (16) facing inside.
2
Fit the knife (4) onto the pin of the scroll (3) with the
blades facing the screen.
3
Place the screen (e.g. 5) over the knife so that the
protrusion in the mincer body will t into the groove in the
circumference of the screen.
4
Tightly t all the elements of the mincer unit.
5
Fit the assembled mincer unit onto the drive unit (1) and
turn it until you hear a click of the lock.
6
Place the tray (7) on the mincer body (2).
Preparing the mincer for operation
and starting the mincer (Fig. D)
1
Place the drive unit (1) near the mains socket on a hard,
stable surface. Do not obstruct the ventilation openings in
the housing.
Wash all parts and accessories before the rst use.
●
Assemble all the required parts and attach them to the
●
drive unit.
2
Carefully pull out the power cord, and then insert the plug
in the mains socket.
3
Start the mincer by means of the switch button (13).
Working with the sausage stung tube (Fig. E)
Insert the following parts into the mincer body (2):
1
Insert the scroll (3) with the coupling (16) facing inside.
2
Fit the insert (12) onto the pin of the scroll (3).
3
Fit the sausage stufng tube (11).
4
Tightly t all the elements with the threaded ring (6).
5
Fit the assembled mincer unit onto the drive unit (1) and
turn it until you hear a click of the lock.
6
Place the tray (7) on the mincer body (2).
Before tting the casing, soak it in warm water for about 10
minutes.
Fit the wet casing onto the sausage stufng tube
●
(11).
Make sure not to clog the ventilation openings in the
tube.

    

Shredder (Fig. B)
1
Fine grating drum
2
Coarse grating drum
3
Slicing drum
4
Pulping drum
5
Locking tab
6
Body
7
Tray
8
Pusher
The shredder is equipped with two drums to grate into small
and bigger chips (cheese, carrot, celery, baked beetroots,
etc.). The third grating drum (slicing drum) is used to grate
vegetables (potatoes, onions, cucumbers, etc.). The fourth
grating drum (pulping drum) is used to grate fruit and
vegetables (potatoes, beetroots, etc.) into pulp.
WORKING WITH THE SHREDDER (Fig. F)
1
Release the locking tab (5) and insert one of the grating
drums with the coupling facing the inside of the body.
2
Snap the locking tab (5).
3
Attach the shredder body (6) in the same way as the
mincer body.
Cut large products into smaller elements, which you can
●
be easily put into the shredder body.
Do not grate soft fruits containing hard stones.
●
When the work is nished turn off and unplug the
●
appliance.
Remove the food remaining in the shredder body or
●
inside the grating drum with a wooden spoon.
        

… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer MM1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer MM1000 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info