538892

Zelmer 13Z011 Manual

216
Zoom out
Zoom in
Previous page
1/228
Next page
216
16. Programming
When the appliance is ready to use (the message READY TO BREW appears on the display) press the (E) MENU (OK)
button once. The coffee maker will start to operate in the programming mode. The button will light after pressing it. The dis-
play will show the menu with the following messages: ECONOMY MODE, LANGUAGE, TEMPERATURE, PREBREWING,
PRESOAKING, WATER HARDN., DESCALING, NO. OF CUPS, CLOCK, DEFAULT.
To select the desired setting press the button (D)
or (F) until the appropriate setting appears on the display. When
the symbol appears before the message, the selection of the desired function is confi rmed. E.g. TEMPERATURE.
To confi rm the selection of this function press the (E) MENU (OK) button, the coffee maker will operate in the temperature
setting mode. Use the buttons (D) or (F) to rewind the submenu, confi rm the selection of the function using the but-
ton (E) MENU (OK). When the symbol * appears on the right side, the given program has been set.
Press the (C) (ESC) button to exit the programming mode.
NOTE: You can press the (C) (ESC) at any time to stop programming without saving the changes. To save the
changes press the (E) MENU (OK) button.
16.1. Setting the energy saving function – ECONOMY MODE
The appliance has an energy saving function which allows for a lower energy consumption when the coffee maker is used
irregularly. This function switches on after a set period of time (default setting: 1 hour). The time setting can be changed
in 15 minute intervals. The maximum setting time is 12 hours, the minimum setting time is 0 minutes.
The appliance is ready to use when the message READY TO BREW appears on the display. Proceed according to the
algorithm below.
The countdown to the switch on of the energy saving mode starts with the appliance test process or a different activity such
as brewing coffee or preparing hot water or steam. The appliance cannot start operating in the energy saving mode until
the set time has not elapsed and the heating element has not stopped operating.
The user can set the economy mode immediately. When the appliance is ready to use the message READY TO BREW
appears on the display. Proceed according to the algorithm below.
To return from the economy mode to the normal mode, press any button on the control panel once, the message ECONOMY
COFFEE will appear on the display. After reaching the appropriate temperature, the message READY TO BREW will
appear on the display.
ATTENTION! The time necessary to return from the energy saving mode to the ready mode is strictly connected to the
period of the stand-by mode (the switch off of the coffee maker heating element). The longer the coffee maker remains in
the ECONOMY MODE, the longer the time necessary to reach the optimal temperature.
… 216 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 13Z011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 13Z011 in the language / languages: English, Polish as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info