The robot can return to the charging station in two different ways based on
what is set in the user menu under the fi eld “Back to recharge.”
“Follow wire”. In this option, the robot follows the perimeter wire,
positioning the wheels on either side of the wire.
“Bounce on wire”. This option requires the perimeter wire to be installed
in a special way (“Recall on the wire”) in the section before the charging
station, as shown in the fi gure. The robot will run along the perimeter wire
touching it every now and again in a rebound movement until it recognises
the “Recall” to the charging station. The robot will follow the perimeter wire
in a precise way for around 10 meters (33 feet) until it encounters the
charging station.
4040
50
step
lower 2 mt.
4-10 mt.
4-10 mt.
4-10 mt.
2 mt.
5 cm.
2 mt.
“Recall bounce on wire” not only indicates to the robot that it is near the charging station, but also of a narrow passage or of an arrow for quick re-
entry to the charging station. As soon as a “Recall” is recognised, the robot will follow the perimeter wire at a slow speed and with more precision
for around 10 meters (33 '). It will then return to the “Bounce on wire” mode if it does not encounter the charging station or the quick re-entry.
Follow these instructions for installing the “Recall.”
•
The “Recall” is a piece of wire that extends for 2 meters (6.6 ') in the garden, with a distance of 5 cm (1.96 ") between each wire.
•
The “Recall” must be positioned at least 4 to 10 meters (13.2 – 33 ') before the charging station.
•
The “Recall” must be positioned in the section before any narrow passages that are less than 2 meters (6.6 ') long.
•
The “Recall” must be positioned in the section before the “Quick Re-entry.”
NB: If the robot does not fi nd the charging station within a certain amount of time, it will follow the perimeter wire in “Follow wire”
mode.
INSTALLATION OF CHARGING STATION AND POWER SUPPLY-TRANSMITTER UNIT
1. Identify the installation area of the charging station and power supply-
transmitter unit.
Warning - Caution
Before carrying out any operations, disconnect the robot
from the mains power.
Position the power supply-transmitter unit in an area that
cannot be reached by children. For example, at a height
above 160 cm. (63.00 ").
protection(L)
current power supply unit(A)
transmitter(B)
H. min. 160 cm
(63.00 ")
2. Install the power supply-transmitter unit (A-B).
3. Remove the protection (L).
4. Position the base in the predefi ned area.
5. Insert the perimeter wire (M) under the base.
6. Connect the two ends of the wire to the terminals of the station.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for ZCS 9L2BL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of ZCS 9L2BL in the language / languages: English as an attachment in your email.
The manual is 10,32 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
