517530
14
Zoom out
Zoom in
Previous page
1/36
Next page
14
User’s manual
EN
5. Delimit any areas below the surface level of the lawn (pools, areas with
signi cant drops, stairs, etc.) (see the gure).
Important
Carefully respect the distances in order to prevent the
robot from falling and breaking and/or being irreversibly
damaged. Increase the distance by at least 30 cm / 11.81
inches in the presence of slopes or slippery ground.
70 cm
27,56 "
70 cm
27,56 "
6. Delimit the perimeters as shown in the gure.
-
With paths at the same height as the lawn: 5 cm (1,96 ")
-
With paths higher than the lawn: 35 cm (13,78 ")
-
In the presence of an enclosing wall: 35 cm (13,78 ")
Important
Footpaths (at the same level as the lawn) for allowing the
robot to pass from one area to another do not need to be
delimited.
5 cm
1,97 "
35 cm
13,78 "
35 cm
13,78
"
INSTALLATION OF THE PERIMETER WIRE
The perimeter wire can be buried or laid on the ground.
Important
Start laying the perimeter wire from the installation area
of the charging station and leave a couple of meters for
cutting it down to size when connecting to the unit.
Max.
5 cm (1,96 ")
perimeter wire
Wire laid on the ground
1. Position the wire in a clockwise direction along the entire track and
secure it with the pegs supplied (distance of 100÷200 cm (39.37÷78.74
") between each peg).
-
Cut the grass as low as possible with a traditional lawnmower or
trimmer along the entire path where the cable will be laid. This will
make it easier to lay the cable in contact with the ground and will
reduce the risk of the robot damaging the insulation.
-
When laying the perimeter wire make sure to respect the rotation
direction around the owerbeds (anti-clockwise).
-
In straight stretches, fasten the wire so that it is not too tight, curved
and/or twisted.
-
In stretches that are not straight, fasten the wire so that it is not
twisted but curves in a regular manner.
NO
wire fastening pegs perimeter wire
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZCS 9L2BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZCS 9L2BL in the language / languages: English as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZCS 9L2BL

ZCS 9L2BL User Manual - Dutch - 56 pages

ZCS 9L2BL User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info