303728

Zanussi zte 273 Manual

13
Zoom out
Zoom in
Previous page
1/68
Next page
Laundry insufficiently spun. Laundry must be adequately spun.
Particularly high room temperature.
Temporary switching off of the com-
pressor to avoid overload.
Automatic process, there is no fault
with the appliance. If possible, lower
the room temperature.
Discoloration Colour fastness of textiles.
Check colour fastness of textiles. Only
treat textiles together if they are a sim-
ilar colour.
Machine settings
Setting Implementation
Alarme (Buzzer) permanent off 1. Turn the programme selector to any programme.
2. Press simultaneously the Délicat (Delicate) and Anti-Froissage (Long An-
ticrease) buttons and hold down for approx. 5 seconds.
3. The buzzer is by default always off.
Water hardness
Water contains, a variable quantity
of limestone and mineral salts of
which quantities vary according to
geographical locations thus vary-
ing its conductivity values.
Relevant variations of the conduc-
tivity of the water compared to
those prefixed by the factory could
slightly influence the residual hu-
midity of the laundry at the end of
the cycle. Your dryer allows you to
regulate the sensitivity of the dry-
ing sensor based on conductivity
values of the water.
1. Turn the programme selector to any programme.
2. Press simultaneously the Anti-Froissage (Long Anticrease) and Marche/
Arrêt (Start/Pause) buttons and hold down for approx. 5 seconds. Lights
show the current setting:
– Bac plein (Water Reservoir) - low conductivity <300 micro S/cm
– Filtres (Filter) - medium conductivity 300-600 micro S/cm
– Condenseur (Condenser) - high conductivity >600 micro S/cm
3. Press the Marche/Arrêt (Start/Pause) button sequentially until you set
desired level.
4. To memorize setting press simultaneously the the Anti-Froissage (Long
Anticrease) and Marche/Arrêt (Start/Pause) buttons or turn knob to OFF
off
position
13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi zte 273 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zte 273 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info