303728
12
Zoom out
Zoom in
Previous page
1/68
Next page
What to do if ...
Troubleshooting by yourself
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or fuse is
not working correctly.
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Loading door is open. Close loading door.
Have you pressed the Marche/Arrêt
(Start/Pause) button?
Press the Marche/Arrêt (Start/Pause)
button again.
Drying results unsatisfactory. Wrong programme selected.
Select a different programme the next
time you dry (see “Programme over-
view” chapter).
Lint filters clogged. Clean lint filters.
Fluff filter clogged. Clean fluff filter.
Heat exchanger clogged with lint. Clean heat exchanger.
Overloading of laundry.
Observe recommended loading vol-
umes.
Ventilation slots in base area covered
up.
Uncover ventilation slots in base area.
Residue on inside surface of drum or
drum ribs.
Clean inside surface of drum and drum
ribs.
Conductance of water at installation
site differs from standard setting of ma-
chine.
Re-programme standard setting for de-
gree of drying (see ‘Programming op-
tions’ chapter).
When a button is pressed - no
reaction of the machine.
Drying protection. After the start of the
programme, the option can no longer
be set.
Turn the programme knob to O
off
. Set
the programme again.
Programme inactive, Bac plein
(Water Reservoir) light up.
Condensate tank is full.
Empty condensate tank, then start pro-
gramme with Marche/Arrêt (Start/
Pause) button.
Drying cycle ends shortly after
programme starts. Anticrease/
End light up.
Not enough washing loaded or washing
loaded is too dry for selected pro-
gramme.
Select time programme or higher dry-
ing level (e.g. Très sec (Extra Dry) in-
stead of Prêt à ranger (Cupboard Dry)
Drying cycle lasts an unusually
long time. Note: After up to 5
hours the drying cycle ends au-
tomatically (see ‘End of drying
cycle’).
Lint filter clogged. Clean lint filter.
Fluff filter clogged. Clean fluff filter.
Load volume too big. Reduce load volume.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi zte 273 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zte 273 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info