663733
4
Zoom out
Zoom in
Previous page
1/32
Next page
3
4
COMPONENTS AND CONTROL ELEMENTS
1. Built-in laser IR Illuminator
2. Battery compartment knob
3. LED indicator
4. Riflescope and built-in IR Illuminator ON/OFF button
5. Eyepiece adjustment ring
6. Controller
7. Video output
8. Weaver rail
9. Objective lens cap
10. Lens focus knob
1 2
7
6
5
3
4
8 10
9
BATTERY INSTALLATION
џ Turn the knob (2) of the battery compartment cover 90°
counterclockwise.
џ Remove the cover by raising it by its lug.
џ Slide in two АА batteries so that the “+” and “-” match the
polarity on the inner side of the cover; rechargeable AA
batteries may be used.
џ Close the cover of the battery compartment cover and
turn the knob (2) of the cover 90° clockwise.
џ Battery charge level is shown on the display (icon ).
In case of complete battery discharge, empty battery
icon turns red. Colour of the LED indicator changes
from green to red.
Note: to ensure long and reliable operation it is recommended that you use quality rechargeable batteries with a
capacity of at least 2500 mAh. Please do not use batteries of different types or batteries with various charge levels.
MOUNTING THE RIFLESCOPE ON WEAPON
џ To ensure precise shooting the sight should be correctly mounted on a rifle. Please follow these steps.
џ Install the mounting rings (bought separately) on the riflescope's tube and tighten the screws with the help of a hex-
nut wrench. If the eye relief is not sufficient, you can use mount Yukon SW-30 (#29048).
џ Install the riflescope on the rail of your rifle and make sure it is securely fixed.
џ The riflescope should be mounted as low as possible without touching either the barrel or the receiver.
џ Before tightening the mount rings make sure you have the necessary eye relief that allows you to see a full field of
view.
WARNING: if the riflescope does not have sufficient eye relief, its rearward motion may injure the shooter when the
rifle
+
+
-
-
AA / 1.5 V
AA / 1.5 V
Pic.1
Pic.2
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yukon Photon XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yukon Photon XT in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info