540486
162
Zoom out
Zoom in
Previous page
1/174
Next page
<14. EXPLOSION PROTECTED TYPE INSTRUMENT>
14-11
IM 01F06A00-01EN
(5) Installation Diagram of Intrinsically safe
(and Note)
DY
(Flowmeter)
SUPPLY
PULSE
Safety barriers
[Integral type]
Electrical data:
Signal/Supply Circuit (Terminals SUPPLY + and –):
Ui = 30 V, Ii = 300 mA, Pi = 0.9 W (linear source),
Ci = 14 nF, Li = 0 mH
Pulse Circuit (Terminals PULSE + and –):
Ui = 30 V, Ii = 300 mA*, Pi = 0.9 W (linear source),
Ci = 14 nF, Li = 0 mH
*: Refer to “Contact rating” for the maximum current value of
Pulse Circuit
Note:
- It shall be assured that the voltage difference between the
output circuits of the associated apparatus (safety barriers)
is not more than 30V.
- Cables for the connection for Signal/Supply Circuit and
Pulse Circuit shall be of Type A or B in accordance with IEC
60079-14, otherwise the sum of Io of the associated
apparatus (safety barriers) shall be not more than 300 mA.
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
+
-
+
[Remote type without built-in Temperature sensor]
PULSE
A
B
T
C
A
B
T
Safety barriers
DY-N (Detector)
DYC: Signal cable
Non Hazardous
Location
Non Hazardous
Location
F1402.ai
Hazardous
Location
Hazardous
Location
DYA (Converter)
SUPPLY
+
-
+
-
+
-
+
-
+
-
+
[Remote type with built-in Temperature sensor]
PULSE
A
B
T
C
A
B
T
Safety barriers
DY-N (Detector)
DYC: Signal cable
Non Hazardous
Location
Hazardous
Location
DYA (Converter)
SUPPLY
(6) Electrical Connection
The type of electrical connection is stamped near
the electrical connection port according to the
following codes.
Screw size
ISO M20 X 1.5 female
ANSI 1/2-14NPT female
!
!
M
N
Marking
F1408.ai
(7) Name Plate
[Integral type, Flameproof]
*2
[Remote type detector, Flameproof]
*2
[Remote type converter, Flameproof]
*2
[Integral type, Intrinsically safe]
*2
[Remote type detector, Intrinsically safe]
*2
[Remote type converter, Intrinsically safe]
*2
MODEL: Speci ed model code
SUFFIX : Speci ed suf x code
STYLE: Style code
SUPPLY : Supply voltage
OUTPUT : Output signal
MWP : Maximum working pressure
K-FACTOR : Device-speci c factor
RANGE: Speci ed range
NO.:
Upper column: Manufacturing serial number *1
Lower column: The year of production
TAG NO. : Speci ed TAG No.
CE: CE marking
II1G: Group II Category 1 Gas atmosphere
II2G: Group II Category 2 Gas atmosphere
II3G: Group II Category 3 Gas atmosphere
*1) The rst number in the second block of “NO.” column is the
last one number of the production year. For example, the
year of production of the product engraved as follows is year
2014.
NO. S5K965926 435 7
Produced in 2014
*2) The product - producing country
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yokogawa DYA Vortex Flow Converter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yokogawa DYA Vortex Flow Converter in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info