638626
26
Zoom out
Zoom in
Previous page
1/33
Next page
PYROGAS VARINO 65 - 300
We reserve the right to make changes to dimensions and construction 24 Edition 02.09.2015
© Copyright YGNIS AG CH-Ruswil
9.5. Explanations of the operating hours and pulse counter display
Operating hours 9999 = 0-9,999 hours
999.9 = 10,000-99,999 hours
display in steps of 10
99.99 = 100,000 - 279,000 hours
display in steps of 100
Pulse counter 9999 = 0-9,999 pulses
999.9 = 10,000-99,999 pulses
display in steps of 10
99.99 = 100,000 - 279,000 pulses
display in steps of 100
The operating hours and start pulses are overwritten in the EPROM in a 24-hour cycle. After a power failure, the
counter shows the value that was stored before the failure occurred.
The maximum counter reading is 279,000 hours or approx. 32 years. After that, it returns to 0.
9.6. Display of interruptions in the condensing unit
When an error occurs this appears automatically on the display. All figures flash in the display.
The first figure shows E for ERROR, the two following figures designate the error code.
For help in the event of errors see chapter 9.9, for the various error codes with their meaning see Annex 1: Error
codes.
9.7. Start process of the condensing unit
9.7.1. Normal starting sequence
step
display
process
a
1
The mechanical ventilation is started (optional)
b
Check whether the differential pressure monitor of the room ventilation is closed
(optional)
c
The external safety gas valve is opened
d
The burner moves to 50% load position
e
5
The gas pressure monitor is inspected
f
The air pressure monitor is inspected (must be open)
g
The combustion air fan is started and run to maximum speed
h
The air pressure monitor is inspected (must be closed)
i
1
The burner ventilates the combustion chamber for 30 seconds
k
The burner moves to start position
l
The combustion air fan is run to the starting speed
m
2
The preliminary heating time is started (approx. 10 seconds)
n
The gas valve (multiblock) is opened
o
The burner ignites
p
Switching over from ignition by incandescence to ionisation measurement
q
3
Release of the O
2
correction
r
Release of the power modulation of the burner
If a defect or irregularity is noted during the starting procedure then the start is repeated or interrupted, a
corresponding error code is shown in the display.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ygnis Varino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ygnis Varino in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ygnis Varino

Ygnis Varino Usermanual and installation guide - German - 30 pages

Ygnis Varino Usermanual and installation guide - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info