734892
7
Zoom out
Zoom in
Previous page
1/31
Next page
7
Unfold
Fold
Pull
ASSEMBLY
Your pressure washer requires some assembly and is ready
for use only after it has been properly serviced with the
recommended oil and fuel.
If you have any problems with the assembly of your
pressure washer, please call the pressure washer help
line at 1-866-902-9690.
IMPORTANT: Any attempt to run the engine before it has
been serviced with the recommended oil will result in an
engine failure.
UNPACK THE PRESSURE WASHER
• Remove everything from carton except the pressure
washer.
• Open carton completely by cutting each corner from top to
bottom.
• Remove pressure washer from carton.
CARTON CONTENTS
Check all contents. If any parts are parts are missing or
damaged, call the pressure washer helpline at
1-866-902-9690.
A- Main unit
B- Quick-connect nozzles (4)
C- Nozzle needle
D- High pressure hose
E- Spray gun
F- Spray wand
G- Operator's Manual
H- Hand crack
I- Funnel
J- Spark Wrench
K- Oil bottle
L- Detergent tank
Become familiar with each piece before assembling the
pressure washer. Check all contents against the illustration.
If any parts are missing or damaged, call the pressure
washer helpline at 1-866-902-9690.
ASSEMBLING YOUR PRESSURE WASHER
Your Craftsman high pressure washer was most ly
assembled at the factory. However, you will need to perform
these tasks before you can operate your pressure washer:
1.Handle position adjustment.
2.Connect hand crank onto hose reel.
3.Add oil to engine crankcase.
4.Add fuel to fuel tank.
5.Lubricate O-rings.
6.Connect hose and water supply to pump.
7.Connect spray wand and quick-connect nozzles.
1. Handle Position Adjustment
Turn
the handle
upward around 100°, until the locking/
releasing pin
engages into the corresponding hole on
each using.
To fold the handle. Pull the locking/releasing pin
outward
on the right side of the pressure washer, and turn the handle
downward to fold the handle.
2. Connect Hand Crank onto Hose Reel
Attach hand crank onto the hose reel. Insert in the hole and
snap into place by hand. No tools required.
A
B
C
D
E
F
G
H
I
J
K
L
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Y0GWC3200R0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Y0GWC3200R0 in the language / languages: English as an attachment in your email.

The manual is 7,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info