733774
26
Zoom out
Zoom in
Previous page
1/33
Next page
50 51
Trimming
This option determines if the mower will carry out boundary trimming during
a mowing cycle. Select the option “Yes” to carry out boundary trimming. To
determine the width of the boundary edge, see the section: Width.
Note
The boundary cable must be carefully checked before confirming
this option. The mower may cut the boundary cable when the cable is
not properly fixed to the ground.
Width
This option determines the distance (0.1-0.4 m) the mower will run past the
boundary cable when performing boundary trimming.
Signal
This option determines which signal (S1 or S2) is using for the boundary cable.
If both you and your neighbour have the same Yard Force Robomower and the
boundary
cables between the two mowers is less than 10 m apart from each other, set the
signal (S1 or S2) of your boundary cable to a different one from your neighbour.
For example, if your neighbour’s mower is already connected through signal S1,
connect your mower to the charging station through signal S2. On the charging
station, you must also carry out the corresponding change. To set the signal to
S2 on the charging station:
Press the button again to change the signal of the charging station back to S1.
PIN
This option sets the passcode of the mower to prevent theft or unauthorised
change of the menu settings. The existing (old) passcode is required to change to
a new passcode. If you have forgotten the passcode, contact your local dealer or
after sales service.
The default passcode of the mower is “0000”.
Rain
Mowing in the rain is not recommended.
This machine has a rain sensor which may stop the robot from mowing in the rain.
When the rain sensor is triggered, the robot will go back to the charging station
rst, where it will be fully charged. Once charged the mower will remain in the
charging station until the rain has stopped before starting to mow again.
Note: Be careful not to short circuit the sensors on the machine with any
metal objects. This will cause the mower to work abnormally.
Rain sensor
Users can activate or deactivate the rain sensor as shown below:
Deactivating rain sensor:
OPERATION
OPERATION
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce SA800PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce SA800PRO in the language / languages: English as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info