586887
166
Zoom out
Zoom in
Previous page
1/320
Next page
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
Creating a Voice/Performance by Using the Sampling Function
MOTIF XS Owner’s Manual
166
Sampling Record—[F6] Standby
This display is used for executing Sampling. Press the [F6]
button from the Setup display to call up this display. Press
the [EXIT] button to go back to the Setup display.
1Waveform (Indication only)
Indicates the number and name of the selected Waveform.
2Key (Key Range) (Indication only)
Indicates the key range of the currently selected Key Bank.
3Velocity (Velocity Range) (Indication only)
Indicates the velocity range of the currently selected Key
Bank.
4Record Monitor
Determines the output level of the monitor for the input
signal while Sampling. The time indicated here is
calculated assuming a mono signal with a sampling
frequency of 44.1 kHz. This monitor signal is output from
the PHONES jack or the OUTPUT R and L/MONO jacks.
Settings: 0 – 127
5Record Gain
This parameter is available only when the Input Source
(page 164) is set to “resample” (recording the sound of the
MOTIF XS itself). This determines the recording gain when
resampling. The higher the value, the greater the volume of
the resampled sound. Before executing the Sampling
operation, you can set the appropriate gain by checking
the volume via the Level Meter ()) while playing the
keyboard.
Settings: -12dB, -6dB, +0dB, +6dB, +12dB
6Key
Indicates the Keybank (page 165) set in the Sampling
Record Setup display. The Key Bank can be changed both
here and in Sampling Edit (page 167) after the Sampling
operation.
Settings: C -2 – G8
nYou can also set the Key directly from the keyboard, by
holding down the [SF6] KBD button and pressing the desired
key. For details, see page 82.
7Trigger Level
When the Trigger Mode (8) is set to “level,” you’ll also
need to set the Trigger Level. Sampling will begin as soon
as an input signal exceeding the specified trigger level is
received. The level set here will be indicated as a red
triangle in the level meter. For best results, set this as low
as possible to capture the entire signal, but not so low as to
record unwanted noise.
Settings: 000 – 127
8Trigger Mode
Determines the method by which Sampling will be triggered.
Settings: level, manual
level
Sampling starts as soon as an input signal exceeding the specified
Trigger Level (7) is received.
manual
Sampling starts soon after you press the [F6] REC button. This setting
lets you start Sampling at your desired timing regardless of the input
level from audio source.
9Recordable Time (Indication only)
Indicates the available Sampling time using the available
memory. The time indicated here is calculated assuming a
mono signal with a sampling frequency of 44.1 kHz. The
amount of memory space currently being used is shown in
the display as a blue line.
)Level Meter
This graph indicates the input level of the input source. Try
to get the input level as high as possible without clipping
for the best sound quality.
nFollow the instructions below to adjust the input level.
When the Input Source is set to A/D Input, adjust the input
signal level by using the GAIN knob on the rear panel. If you
cannot adjust the input level appropriately, change the Mic/
Line setting (page 263) in the Utility mode.
When the Input Source is set to Resample, adjust the input
signal level by setting the Record Gain (5).
When the Input Source is set to mLAN, the input level
cannot be adjusted.
![SF1] Confirm
This determines whether you can confirm the recorded
Sample (on) or not (off) after Sampling is finished. This is
useful for conveniently recording again if you are not
satisfied with the Sampling results. When this is turned off,
the recorded sample is fixed as data as soon as the
Sampling is finished then the instrument returns to the
Setup display (page 164). Please note that the instrument
returns to the STANDBY display after the Sampling is
finished when Record Next is turned on in the Setup
display.
@[F5] Start
Press this button to start Sampling.
When the Trigger mode is set to “level,” pressing the [F5]
Start button calls up the WAITING indication on the display.
Actual Sampling does not start. When audio signal
exceeding the specified Trigger Level (7) is input to the
instrument, the RECORDING indication replaces the
WAITING indication and Sampling starts.
1
2
4
56
3
7
8
9
)
@!
166


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info