586887
168
Zoom out
Zoom in
Previous page
1/320
Next page
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
Creating a Voice/Performance by Using the Sampling Function
MOTIF XS Owner’s Manual
168
Sample Playback settings—[F1] Trim
This display lets you set the playback range and loop
range of the Sample.
A convenient Extract function lets you delete unneeded
portions of the Sample prior to the start point and after
the end point, allowing you to save memory for additional
Sampling.
1Press the [F1] Trim button to call up the Trim
display.
2Press the [ENTER] button. (The display
prompts you for confirmation.)
If you wish to cancel the operation, press the [DEC/
NO] button.
3Press the [INC/YES] button to execute Extract.
nThe data deleted via the Extract operation cannot be
recovered. Before executing the Extract, you may want
to back up this Sample by using the Copy Job
(page 172).
Tips for editing the Samples
How to play the Sample (Play Mode settings)
There are two methods for playing back the Sample: One
shot and Loop. Loop lets you play the specified range of
the Sample repeatedly in a loop. One Shot, on the other
hand, lets you play the entire Sample only once.
You’ll need to determine which type (Loop or One Shot) is
used by setting the Play Mode parameter in the
Parameter display (page 170).
Fine-tuning playback of One Shot Samples
You can determine the playback range of the Sample by
setting the Start Point (
6
) and End Point (
8
) in the Trim
display (page 168). These parameters effectively let you
mute unnecessary or unwanted audio from the beginning
and end of your Sample. To cut sound at the end of
playback, decrease the End Point value, moving it
leftward on the wave display. Similarly, to cut sound at the
beginning of playback, increase the Start Point value,
moving it rightward on the wave display. In general, you’ll
want to set the Start Point so that the beginning of the
Sample plays back immediately when triggered. Use the
[SF1] Audition button to check playback of the Sample,
that it sounds smooth and natural. After setting and
confirming the Start/End Points, trim them permanently
from the Sample by using the Extract operation
(page 177).
Fine-tuning playback of Loop Samples
Setting the Start and End Points in a Loop Sample is
generally more crucial and painstaking than with One
Shot Samples. The Start and End Points must be set
accurately to ensure that the Loop plays back smoothly
and continuously without stutters or glitches. You’ll also
need to make sure (with rhythmic loops) that the Loop is
in perfect rhythm and no beats are lost.
1Set the Play Mode to “loop.
Press the [F2] Param button to call up the Parameter
display (page 170) then set the Play Mode (6) to
“loop.”
Hint 2Set the Start Point to the 1st beat of the 1st
measure.
Press the [F1] Trim button to call up the Trim display
(page 168) then set the Start Point (6).
3Set the Loop Point to the value same as the
Start Point.
Press the [SF2] button so that the LP=ST is shown.
4While holding the [SF1] Audition button, adjust
the End Point so that looped playback of the
Sample is smooth and matches the beat timing.
5Execute the Extract operation (page 177).
How to set the tempo of the Sample
If you do not know the tempo of the Sample containing
the rhythm pattern, follow the instructions below.
1While holding the [SF1] Audition button, adjust
the Start Point and End Point so that looped
playback of the Sample is smooth and matches
the beat timing.
Make sure to also use the Extract operation to delete
unnecessary parts from the Sample.
2Set the time signature and measure.
Press the [F1] Trim button to call up the Trim display
(below) then set the time signature ()) and measure
(!).
3Increase or decrease the Tempo (9) as
necessary so that the End Point (8) becomes
equivalent to the end point applied to the
original Sample.
Set the Tempo (9) to a large value then decrease it
gradually so that the End Point (8) increases
gradually. Once you reach a certain value, the End
Point no longer increases, even when you decrease
the Tempo. The resulting value is the End Point
applied to the original Sample. The final Tempo value
is the most appropriate tempo for Sample playback.
1
24
5
6
7
8
9
)
!
º
@
* # $ % ^ &(
3
168


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info