586887
165
Zoom out
Zoom in
Previous page
1/320
Next page
Creating a Voice/Performance by Using the Sampling Function
MOTIF XS Owner’s Manual 165
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
5Frequency
Specifies the sampling frequency. When the Input Source
(2) is set to “mLAN,” this parameter is fixed to “44.1kHz.”
Normally, this parameter should be set to “44.1kHz,” the
highest setting. If you wish to obtain a lo-fi sound, select a
value other than 44.1 kHz. At settings other than 44.1 kHz,
the sound monitored during recording may be different
from the recorded sound, depending on the source signal.
Settings: 44.1k (44.1 kHz), 22.0kLo (22.05 kHz Lo-Fi), 11.0kLo
(11.025 kHz Lo-Fi), 5.5kLo (5.5125 kHz Lo-Fi)
6Waveform
Determines the Waveform number as destination.
Settings: 0001 – 1024
The Sampling operation overwrites any data previously existing at
the destination Waveform number. Important data should always
be saved to a USB storage device connected to the USB TO
DEVICE terminal or to a computer connected to the same network
as the MOTIF XS (page 278).
7Keybank
Determines the note number of the Key Bank as
destination. The value set here can be changed in the
Sampling Edit mode (page 167).
Settings: C -2 – G8
nYou can also set the Key directly from the keyboard, by
holding down the [SF6] KBD button and pressing the desired
key. For details, see page 82.
8Track
This parameter is not available when entering the Sampling
mode from the Voice/Performance mode.
9Part
Determines the Performance Part to which the Voice ())
created by Sampling is assigned. When set to off, the
obtained Sample is not assigned to the Performance part.
This parameter is available when entering the Sampling
mode from the Performance mode. When the Voice ()) is
set to off, this parameter cannot be set even if entering the
Sampling mode from the Performance mode.
Settings: off, 1 – 4
)Voice
Determines the voice to which the Waveform (6) created
via the Sampling is assigned by specifying the Voice Bank
and Number. Setting the Voice Bank to any of USER1 – 3
assigns the Waveform (6) to the Element 1 of the new
Normal Voice created via Sampling. Setting the Voice Bank
to UDR assigns the Waveform (6) to the Drum Key (!) of
the specified Drum Voice. When this is set to “off,” only a
Waveform (6) is created; the Sample is not stored as a
User Voice.
Settings:
Voice Bank: Off, USER1 – 3 (User 1 – 3), UDR (User Drum)
Voice Number: 001 – 128
When the Voice Bank is set to any of USER1 – 3, the Sampling
operation overwrites any data already existing in the destination
Voice number. Important data should always be saved to a USB
storage device connected to the USB TO DEVICE terminal or to a
computer connected to the same network as the MOTIF XS
(page 278).
!Drum Key
Determines the Key to which the Waveform (6) is
assigned when the Voice Bank ()) is set to “UDR.”
Settings: C0 – C6
@Recordable Time (Indication only)
Indicates the available Sampling time using the available
memory. The time indicated here is calculated assuming a
mono signal with a sampling frequency of 44.1 kHz. The
amount of memory space currently being used is shown in
the display as a blue line.
#[SF6] INFO (Information)
Indicates the amount of Sampling memory used.
1Used/Total (Indication only)
Indicates the amount of memory being used and the total
amount available.
2Recordable Size (Indication only)
Indicates the amount of free memory.
3Recordable Time (Indication only)
Indicates the available Sampling time using the available
memory. The time indicated here is calculated assuming
that the sampling frequency is 44.1 kHz with mono.
$[F6] Standby
Pressing this button calls up the Sampling Record Standby
display. This display is used for executing Sampling. For
details, see page 166.
CAUTION
CAUTION
1
2
3
165


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info