In this Mode, you can restore this synthesizer’s User memory (page 186) to the factory default settings (Factory Set). For details, see page 44.
nSince the settings of the Plug-in Boards in the Utility mode are stored not to internal User memory but to the memory on the respective boards themselves,
the data cannot be restored with this Job.
■ Supplementary
Setting the default display when turning the power on
1Enter the desired mode and the program number you wish to call up first when turning the power on.
2Press the [ENTER] button while holding the [STORE] button to register the mode and program number set in step #1.
3Set the PowerOnMode parameter to “last” in the [UTILITY] →→
→→ [F1] GENERAL →→
→→ [SF4] OTHER display.
4Press the [STORE] button to store the Utility setting made in step #3 above.
5Turn the power off and turn the power on again to call up the mode/program number set in step #2 to the display.
[SF4] OTHER
MIDI IN/OUTDetermines which physical output terminal(s) will be used for transmitting/receiving MIDI data: MIDI IN/OUT, USB, or
mLAN (when the optional mLAN16E has been installed).
Settings:MIDI, USB, mLAN
nThree types of terminals above cannot be used at the same time. Only one of them can be used to transmit/receive MIDI data.
ThruPort (Through Port)Many computer sequencers are capable of transmitting data over several MIDI ports, effectively breaking the 16-
channel barrier. When using the USB terminal or mLAN terminal (when the optional mLAN16E has been installed) for
MIDI transmission/reception, you can have this synthesizer respond to MIDI data over one port, while relaying the
data for another port number (you can set here) to a separate tone generator (connected to the MIDI OUT terminal).
In this way, 16 channels of data can be played on this synthesizer and another 16 can be played on the connected
MIDI device.
Settings:1~8
nWhen the mLAN16E has been installed and the MIDI IN/OUT is set to mLAN, ports 5 ~ 8 are not available even if you set them
here.
[F6] PLUG
[SF1] STATUS
Plug1: ~ Plug3:Indicates the name of the Plug-in Board which has been installed to this synthesizer.
PolyExpandThis parameter is accessible only when you have two or three identical Plug-in boards installed. The “off” setting
enables two or three boards to work separately (you can select them for two or three different Parts). When this is set
to “on,” the two boards effectively function together as one board (used in a single part) — giving you double the
amount of polyphonic notes you can play at one time.
Settings:on, off
[SF2] MIDIFrom this display you can set various MIDI-related parameters for the Plug-in board.
DEVNO. (Device Number)Determines the MIDI Device Number of the Plug-in Board. This number must match the Device Number of the
external MIDI device when transmitting/receiving bulk data, parameter changes or other system exclusive
messages.
Settings:1~16, all, off
PORTNO. (Port number)Determines the MIDI Port number over which the Plug-in board receives MIDI data in the multi-timbral tone
generator mode (Song/Pattern modes). One port can be set for a Multi-part Plug-in board and two ports can be set
for a Single part Plug-in board.
Settings:off, 1~3
nThe Port number for the Effect Plug-in board (VH) is fixed to 1.
nFor information on the Plug-in board and the internal tone generator block, see page 163.
GM/XGDetermines whether “GM on” and “XG on” messages are recognized (on) or not (off). This parameter is available
only when a Multi-part Plug-in board has been installed to slot 3.
Settings:on, off
[SF3] NATIVE1From this display you can set the Native System parameters of the Plug-in board installed to slot 1.
For details on the parameters, refer to the owner’s manual of your particular Plug-in board.
[SF4] NATIVE2From this display you can set the Native System parameters of the Plug-in board installed to slot 2.
For details on the parameters, refer to the owner’s manual of your particular Plug-in board.
[SF5] NATIVE3From this display you can set the Native System parameters of the Plug-in board installed to slot 3.
For details on the parameters, refer to the owner’s manual of your particular Plug-in board.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
