571272
264
Zoom out
Zoom in
Previous page
1/300
Next page
Reference Utility Mode
Utility mode
264 Owner’s Manual
KBDTransCh
(Keyboard Transmit Channel) Determines the MIDI channel over which the instrument sends MIDI data (to an external sequencer, tone generator,
or other device). This parameter is available in the single-timbre tone generator mode (Voice/Performance modes).
Settings: 1~16, off
nIn the multi-timbral tone generator mode (Song/Pattern modes), MIDI data generated by playing the keyboard (and its
controllers) is sent to the internal tone generator and external devices via the MIDI output channel, set from the CHANNEL
display ([SONG] or [PATTERN] [F3] TRACK [SF1] CHANNEL).
DeviceNo. (Device Number) Determines the device number used by this synthesizer in receiving or transmitting data. This number must match
the Device Number of the external MIDI device when transmitting/receiving bulk data, parameter changes or other
system exclusive messages.
Settings: 1~16, all, off
[SF2] SWITCH
BankSel This switch enables or disables Bank Select messages, both in transmission and reception. When this is set to “on,”
this synthesizer responds to incoming Bank Select messages, and it also transmits appropriate Bank Select
messages (when using the panel).
Settings: off, on
PgmChange (Program Change) This switch enables or disables Program Change messages, both in transmission and reception. When this is set to
“on,” this synthesizer responds to incoming Program Change messages, and it also transmits appropriate Program
Change messages (when using the panel).
Settings: off, on
CtrlChange
(Control Change mode) Determines how this synthesizer receives and recognizes the AEG Sustain MIDI message. When set to mode1, it is
received as a Parameter Change. When set to mode2, it is received as a Control Change message.
Settings: mode1, mode2
LocalCtrl (Local Control On/Off) This determines whether or not the tone generator of the instrument responds to your keyboard playing. Normally,
this should be set to “on” — since you’ll want to hear the sound of the MOTIF ES as you play it. However, for external
sequencer applications, you may need to set this to “off” to avoid getting “double” notes, in which the tone generator
of the instrument is played twice — once by the keyboard and once again by the keyboard data routed through the
sequencer.
Even if this is set to “off,” the data will be transmitted via MIDI. Also, the internal tone generator block will respond to
messages received via MIDI.
Settings: off, on
RcvBulk (Receive Bulk) Determines whether or not Bulk Dump data can be received.
Settings: protect (not received), on (received)
[SF3] SYNC (Synchronization) From this display you can set various parameters related to MIDI clock and synchronization.
MIDI Sync Determines whether Song/Pattern/Arpeggio playback will be synchronized to the instrument’s internal clock or an
external MIDI clock.
Settings: internal, MIDI, MTC
internal ..............................Synchronization to internal clock. Use this setting when this synthesizer is to be used alone or as the master
clock source for other equipment.
MIDI ..................................Synchronization to a MIDI clock received from an external MIDI instrument via MIDI.
MTC (MIDI Time Code).....Synchronization to an MTC signal received via MIDI. MMC signals are transmitted via MIDI. Use this setting
when this synthesizer is to be used as a MIDI slave, such as when synchronized to an MTC-capable MTR.
The MTC Sync function is available only in the Song mode.
nPlease keep in mind that the song or pattern will not start even if you press the [F] (Play) button when the MIDI Sync is set to
other than “internal.”
nMTC (MIDI Time Code) allows simultaneous synchronization of multiple audio devices via standard MIDI cables. It includes
data corresponding to hours, minutes, seconds, and frames. This synthesizer does not transmit MTC. A device such as the
Yamaha AW4416 is necessary in order to use this synthesizer as an MTC master.
nMMC (MIDI Machine Control) allows remote control of multitrack recorders, MIDI sequencers, etc. A MMC-compatible
multitrack recorder, for example, will automatically respond to start, stop, fast forward, and fast reverse operations performed
on the controlling sequencer, thus keeping playback of the sequencer and multitrack recorder aligned.
ClockOut Determines whether MIDI clock (F8) messages will be transmitted via MIDI.
Settings: on (transmitted), off
SeqCtrl (Sequencer Control) Determines whether Sequencer Control signals – start, continue, stop, and song position pointer – will be received
and/or transmitted via MIDI.
Settings: off, in, out, in/out
off .....................Not transmitted/recognized.
in ......................Recognized but not transmitted.
out ....................Transmitted but not recognized.
in/out ...............Transmitted/recognized.
MTC StartOffset Determines the specific time code point from which sequence playback starts, when MTC is received. This feature
can be used to accurately align playback of this synthesizer with an external MTC-compatible device.
Settings: Hour : Minute : Second : Frame
Hour ................00~23
Minute .............00~59
Second ............00~59
Frame ..............00~29
264


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info