When this is set to on and the [SYSTEM] button is turned on, the Reverb effect is bypassed.
F
Chorus
When this is set to on and the [SYSTEM] button is turned on, the Chorus effect is bypassed.
n
For details about the Effects, see page 177.
[SF4] OTHER
AutoLoad
Determines whether the Auto Load function is on or off. When this is on, the instrument will automatically load the
specified files (from SmartMedia/USB storage device) to User memory — whenever the power is turned on.
For details about the Auto Load function, see page 135.
Settings:
on, off
PowerOnMode
This determines the default power-on mode (and memory bank) — letting you select which condition is automatically
called up when you turn the power on.
Settings:
performance, voice (USR1), voice (PRE1), GM, last, master
performance....When turning the power on next time, the Performance Play mode is entered and the first program number (USER: 001)
is selected automatically.
voice (USR1)...When turning the power on next time, the Voice Play mode is entered and the first program number of the User Voices
(USR1: 001) is selected automatically.
voice (PRE1)....When turning the power on next time, the Voice Play mode is entered and the first program number of the Preset Voices
(PRE 1: 001) is selected automatically.
GM...................When turning the power on next time, the Voice Play mode is entered and the first program number of the GM Voices
(GM: 001) is selected automatically.
last...................When turning the power on next time, the mode and program number (Voice/Performance/Song/Pattern/Master)
registered the last time before turning the power off are called up. For information on how to register the mode and
program number for “last,” see page 265.
master.............When turning the power on next time, the Master Play mode is entered and the first program number (001) is selected
automatically.
CtrlReset (Controller Reset)
Determines the status of the controllers (Modulation Wheel, Aftertouch, Foot Controller, Breath Controller, Knobs,
etc.) when switching between voices. When this is set to “hold,” the controllers are kept at the current setting. When
this is set to “reset,” the controllers are reset to the default states (below).
Settings:
reset, hold
If you select “reset,” the controllers will be reset to the following states/positions:
Pitch Bend.....................Center
Modulation Wheel..........Minimum
Aftertouch .....................Minimum
Foot Controller ..............Maximum
Breath Controller ..........Maximum
Foot Switch ...................Off
Expression ....................Maximum
Foot Volume ..................Maximum
Sustain ..........................Off
[F2] I/O (Input/Output)
[SF1] INPUT
From this display you can set parameters related to audio input.
Mic/Line
When using the A/D INPUT jacks, this determines the input source, microphone (mic) or line.
Settings:
mic, line
mic...................Intended for low output equipment, such as a microphone, electric guitar or bass.
line...................Intended for high output equipment, such as a keyboard, synthesizer, or CD player.
Digital
When the optional AIEB2 board is installed, two separate input connections for digital audio transfer are available:
coaxial and optical. One or the other must be set; the two cannot be used at the same time.
Settings:
coaxial, optical
[SF2] OUTPUT
From this display you can set parameters related to audio output.
L&RGain
Set the output gain of each jack.
Settings:
0dB, +6dB
Assign Gain L&R, 1&2, 3&4, 5&6,
7&8, 9&10, 11&12, 13&14
Digital
Specify the digital output resolution of the optionally installed AIEB2 board (page 25).
Settings:
20bit, 24bit
mLAN MonitorSw
When this is set to on, the audio signal of the instrument output via an IEEE1394 cable to a computer will be output
also via the main OUTPUT L/MONO and R jacks. When this is set to on, the audio signal sent from a computer to the
instrument will be output via the main OUTPUT L/MONO and R jacks directly, bypassing the Effect block.
Settings:
on, off
[F3] VOICE
[VOICE]
→
[UTILITY]
→
[F3]
These special voice-related settings are available only when entering the Utility mode from the Voice mode, letting you set parameters related to all the Voices.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
