571272
260
Zoom out
Zoom in
Previous page
1/300
Next page
Reference Utility Mode
Utility mode
260 Owner’s Manual
Utility mode
The Utility mode features a variety of important settings related to overall operation of the MOTIF ES. These settings can also be stored — simply
press the [STORE] button from any mode (with the exception of the Utility Job mode), and store the data to internal Flash ROM as system
settings (page 186). You can also save the settings to a SmartMedia/USB storage device in the File mode.
In this mode, you can set parameters that apply to the entire system of the MOTIF ES.
This mode is actually a sub-mode of the Voice/Performance/Song/Pattern mode. Press the [UTILITY] button in each mode to enter the Utility
mode and press the [EXIT] button after making settings to go back to the previous mode.
Utility mode [UTILITY]
[F1] GENERAL
[SF1] TG (Tone Generator) From this display you can make overall settings for the internal tone generator. Settings here do not affect MIDI
messages transmitted to the external MIDI instrument.
Volume Determines the overall volume of the instrument.
Settings: 0~127
NoteShift Determines the amount (in semitones) by which the pitch of all notes is shifted.
Settings: -24~0~+24
Tune Determines the fine tuning (in 0.1 cent steps) of the internal tone generator’s overall sound.
Settings: -102.4~+102.3
BCCurve
(Breath Controller Curve) These four curves determine how the sound of the internal tone generator responds to use of a Breath Controller.
The setting here affects the Destination parameters when the Source is set to “BC,” both of which can be set in the
CTL SET displays ([VOICE] [EDIT] [COMMON] [F4] CTL SET).
The graph shown in the display indicates the controller response curve. (The horizontal line represents the received
breath control values, while the vertical line represents the actual response of the internal tone generator.)
Settings: thru, soft, hard, wide
[SF2] KBD (Keyboard) From this display you can set the keyboard-related parameters. The settings here affect the MIDI messages
generated by playing the keyboard.
Octave Determines the amount in octaves by which the range of the keyboard is shifted up or down. This setting can be
changed also by pressing any of the [OCTAVE] buttons.
Settings: -3~0~+3
Transpose Determines the amount in semitones by which the range of the keyboard is shifted up or down.
Settings: -11~ 0 ~+11
nIf you transpose beyond the note range limits (C-2 and G8), notes in the adjacent octaves will be used. For example, a
transposed note of F9 will be changed to F8.
VelCurve (Velocity Curve) These five curves determine how the actual velocity will be generated and transmitted according to the velocity
(strength) with which you play notes on the keyboard.
The graph shown in the display indicates the velocity response curve. (The horizontal line represents the received
velocity values (strength of your playing), while the vertical line represents the actual velocity values transmitted to
the internal/external tone generators.)
Settings: norm, soft, hard, wide, fixed
norm (normal) .......This linear “curve” produces one-to-one correspondence between the strength of your keyboard playing (velocity)
and the actual sound change.
soft ........................This curve provides increased response, especially for lower velocities. In other words, playing softly results in
higher response than the “norm” curve.
hard.......................This curve provides increased response, especially for higher velocities. In other words, playing hard results in
higher response than the “norm” curve.
wide ......................This setting provides opposite response curves for lower and higher velocities. It widens the apparent dynamic
range of the controller, producing less sound change in the softer range and more change in the higher range.
fixed ......................This setting produces the same amount of sound change (set in Fixed Velocity below), no matter what your playing
strength.
FixedVelocity This parameter is only available if you select the “fixed” Velocity Curve above. The velocity of the note you play is
fixed at the value set here.
Settings: 1 ~ 127
[SF3] EF BYPS (Effect Bypass) From this display you can select the specific effect(s) to be bypassed when the [INSERTION] or [SYSTEM] button of
EFFECT BYPASS buttons is turned on.
Insertion
FInternal When this is set to on and the [INSERTION] button is turned on, the internal Insertion effect is bypassed.
FPLG-EF (Plug-in Effect) When this is set to on and the [INSERTION] button is turned on, the PLG100-VH Insertion effect is bypassed. This is
available only when the PLG100-VH has been installed.
260


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info