Sampling Record mode When entering the Sampling mode from the Song mode/Pattern mode
253
Owner’s Manual
When entering the Sampling mode from the Song mode/Pattern mode
In this case, you can create a Waveform or Sample Voice by recording sounds input from external devices such as a microphone and audio
equipment.
[F1] DEST (Destination)
From this display you can determine the destination location to which the recorded sample will be stored.
TrackDetermines the track number to which the recorded sample is assigned.
Settings:1 ~ 16
KeybankDetermines the note number located at the center of the Key Bank. This parameter is available only when the
Sampling type is set to “sample” or “sample+note” (in the Type parameter below).
Settings:C-2 ~ G8
[F2] SOURCE
From this display you can set parameters related to the audio source.
TypeDetermines the Sampling type. When entering the Sampling mode from the Song/Pattern mode, the data created by
Sampling varies depending on this setting.
Settings:sample, sample+note, slice+seq
sample..................Only sample (wave) data is created.
sample+note........In addition to sample data, the appropriate note data for playing the sample is created and recorded to the track
specified in the [F1] DEST display.
slice+seq..............The recorded sample is automatically divided into “slices,” and these are assigned to successive notes on the
keyboard.
nDetailed settings (meter, measure number etc,) are specified in the Slice display after sampling.
SourceDetermines the recording source.
Same as in the Sampling mode from the Voice mode/Performance mode. See above.
NextDetermines whether multiple samples can be recorded without exiting from the Record mode (on) or not (off). When
you wish to assign individual samples to the keys one by one to create a Drum Voice, set this parameter to on.
Keep in mind that this parameter is fixed to off when the Source is set to “slice + seq.”
Mono/StereoDetermines whether new samples will be recorded as stereo or mono samples.
Same as in the Sampling mode from the Voice mode/Performance mode. See above.
Frequency
(Sampling Frequency)Specifies the sampling frequency.
Same as in the Sampling mode from the Voice mode/Performance mode. See above.
[F6] REC
Even if you press the [F6] REC button, recording (sampling) will not start immediately. Set various parameters such as Trigger Mode in the Sampling Standby
display, then start the actual sampling according to the settings.
STANDBY (Sampling Standby)Press the [REC] button to enter the Sampling Standby display. From this display you can turn the Confirm function on
or off by pressing the [F2] CONFM button as well as set parameters listed below. For details about the Confirm
function, refer to page 95 in the Quick Guide section.
Please keep in mind that the Confirm function is not available when the Type in the [F2] SOURCE display is set to
“slice+seq.”
TrggrMode (Trigger Mode)Specifies the method by which sampling will be triggered.
Settings:level, meas, manual
level......................Same as in the Sampling mode from the Voice mode/Performance mode. See above.
meas (measure)...This should be set together with the Punch-in/out measure. After the [F6] START button is pressed, sampling will
begin at the specified punch-in measure, and end at the specified punch-out measure. Sampling will also stop when
the Song/Pattern is stopped by pressing the [J] (Stop) button.
manual..................Same as in the Sampling mode from the Voice mode/Performance mode. See above.
KeyThis appears when Type in the [F2] SOURCE display is set to something other than “slice+seq.” This is the same
parameter as Keybank in the [F1] DEST display.
RecMonitor (Recording Monitor)Determines the output level of the monitor for the input signal.
This monitor signal is output from the PHONES jack or the OUTPUT R and L/MONO jacks. This has no effect on the
recording level.
Settings:0 ~ 127
RecGain (Recording Gain)Determines the recording gain when resampling. This parameter is available only when the Source is set to
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
