[SF3] SELECT (Output Select)From this display you can assign individual Parts to sound from independent output connectors (jacks).
OutputSel (Output Select)Determines the specific output(s) for the individual Part. You can assign each individual Part’s Voice to be output
from a specific hardware output jack on the rear panel.
Settings:See page 31.
InsEF (Insertion Effect)Determines whether the Insertion effects are applied to individual Parts or not.
Settings:on, off
[F3] EQ (Equalizer)
From this display you can adjust the EQ settings for each Part. Note that two different display types listed below are provided and you can switch between them
by pressing the [SF5] button. Each display type features the same settings in a different format; use the type you feel most comfortable with.
• Display showing four Parts
• Display showing all parameters for one Part
Keep in mind that since all the available parameters cannot be simultaneously displayed in the four-Part display, you will need to use the cursor controls to scroll
the display in order to see and set the other parameters.
For details about the Effect connection including the EQ in the Performance mode, see page 179.
nThis display is not available for the Plug-in Part.
LowFreq (Low Frequency)Determines the center frequency of the low EQ band that is attenuated/boosted.
Settings:50.1 ~ 2.00K
LowGain (Low Gain)Determines the amount of boost or attenuation applied to the low EQ band.
Settings:-32 ~ +32
MidFreq (Middle Frequency)Determines the center frequency of the middle EQ band that is attenuated/boosted.
Settings:139.7 ~ 10.1K
MidGain (Middle Gain)Determines the amount of boost or attenuation applied to the middle EQ band.
Settings:-32 ~ +32
MidReso (Middle Resonance)Determines the resonance applied to the center frequency of the middle EQ band.
Settings:0 ~ 31
HighFreq (High Frequency)Determines the center frequency of the high EQ band that is attenuated/boosted.
Settings:503.8 ~ 14.0K
HighGain (High Gain)Determines the amount of boost or attenuation applied to the high EQ band.
Settings:-32 ~ +32
[F4] TONE
You can set parameters related to the pitch and tone for each Part. Keep in mind that the settings made here are applied as offsets to the Voice Edit settings.
[SF1] TUNE
NoteShiftDetermines the pitch (key transpose) setting for each Part in semitones.
Settings:-24 ~ +24
DetuneDetermines the fine tuning for each Part.
Settings:-12.8Hz ~+12.7Hz
[SF2] FILTER
CutoffDetermines the cutoff frequency for each Part. This parameter is available for the LPF when the filter used by the Part
is a combination type of LPF and HPF.
Settings:-64 ~ 0 ~ +63
ResonanceDetermines the amount of filter resonance or emphasis of the Cutoff Frequency for each Part. The setting here
attenuates/boosts the resonance applied to the element of the Voice assigned to each Part.
Settings:-64 ~ 0 ~ +63
FEGDepthDetermines the Filter Envelope Generator depth (amount of cutoff frequency) for each Part.
Settings:-64 ~ 0 ~ +63
nThe FEG Depth setting is not available for the Plug-in Parts.
nFor details about Filter, see page 161.
[SF3] FEG
(Filter Envelope Generator)
From this display you can set the FEG (Filter Envelope Generator) parameters for each Part.
nThe FEG settings are not available for Plug-in Parts.
Attack (Attack Time)Determines each parameter of the FEG for each Part.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
